add 100 go mistakes skill

101 files changed, 2034 insertions, 0 deletions

diff --git a/prompts/skills/100-go-mistakes/SKILL.md b/prompts/skills/100-go-mistakes/SKILL.md
new file mode 100644
index 0000000..0dd9633
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/SKILL.md
@@ -0,0 +1,139 @@
+---
+name: 100-go-mistakes
+description: Audits Go code repositories for common mistakes as identified in the "100 Go Mistakes and How to Avoid Them" book. Use this skill when asked to review Go code, check for best practices, or find common anti-patterns in Go.
+---
+
+# 100 Go Mistakes
+
+This skill helps you identify and fix the most common mistakes made by Go developers. It is based on the book "100 Go Mistakes and How to Avoid Them" by Teiva Harsanyi.
+
+## Workflow
+
+1. **Trigger**: When asked to review Go code or find mistakes, activate this skill.
+2. **Analysis**: Use the list below to identify potential areas of concern in the target repository.
+3. **Reference**: Read the specific mistake documentation in the `references/` folder to understand the mistake and how to fix it.
+4. **Action**: Suggest or apply fixes to the codebase.
+
+## List of Mistakes
+
+### 1. Code and Project Organization
+- [Mistake #1: Unintended variable shadowing](references/mistake-01-unintended-variable-shadowing.md)
+- [Mistake #2: Unnecessary nested code](references/mistake-02-unnecessary-nested-code.md)
+- [Mistake #3: Misusing init functions](references/mistake-03-misusing-init-functions.md)
+- [Mistake #4: Overusing getters and setters](references/mistake-04-overusing-getters-and-setters.md)
+- [Mistake #5: Interface pollution](references/mistake-05-interface-pollution.md)
+- [Mistake #6: Interface on the producer side](references/mistake-06-interface-on-the-producer-side.md)
+- [Mistake #7: Returning interfaces](references/mistake-07-returning-interfaces.md)
+- [Mistake #8: any says nothing](references/mistake-08-any-says-nothing.md)
+- [Mistake #9: Being confused about when to use generics](references/mistake-09-being-confused-about-when-to-use-generics.md)
+- [Mistake #10: Not being aware of the possible problems with type embedding](references/mistake-10-not-being-aware-of-the-possible-problems-with-type-embedding.md)
+- [Mistake #11: Not using the functional options pattern](references/mistake-11-not-using-the-functional-options-pattern.md)
+- [Mistake #12: Project misorganization](references/mistake-12-project-misorganization-project-structure-and-package-organization.md)
+- [Mistake #13: Creating utility packages](references/mistake-13-creating-utility-packages.md)
+- [Mistake #14: Ignoring package name collisions](references/mistake-14-ignoring-package-name-collisions.md)
+- [Mistake #15: Missing code documentation](references/mistake-15-missing-code-documentation.md)
+- [Mistake #16: Not using linters](references/mistake-16-not-using-linters.md)
+
+### 2. Data Types
+- [Mistake #17: Creating confusion with octal literals](references/mistake-17-creating-confusion-with-octal-literals.md)
+- [Mistake #18: Neglecting integer overflows](references/mistake-18-neglecting-integer-overflows.md)
+- [Mistake #19: Not understanding floating-points](references/mistake-19-not-understanding-floating-points.md)
+- [Mistake #20: Not understanding slice length and capacity](references/mistake-20-not-understanding-slice-length-and-capacity.md)
+- [Mistake #21: Inefficient slice initialization](references/mistake-21-inefficient-slice-initialization.md)
+- [Mistake #22: Being confused about nil vs. empty slice](references/mistake-22-being-confused-about-nil-vs-empty-slice.md)
+- [Mistake #23: Not properly checking if a slice is empty](references/mistake-23-not-properly-checking-if-a-slice-is-empty.md)
+- [Mistake #24: Not making slice copies correctly](references/mistake-24-not-making-slice-copies-correctly.md)
+- [Mistake #25: Unexpected side effects using slice append](references/mistake-25-unexpected-side-effects-using-slice-append.md)
+- [Mistake #26: Slices and memory leaks](references/mistake-26-slices-and-memory-leaks.md)
+- [Mistake #27: Inefficient map initialization](references/mistake-27-inefficient-map-initialization.md)
+- [Mistake #28: Maps and memory leaks](references/mistake-28-maps-and-memory-leaks.md)
+- [Mistake #29: Comparing values incorrectly](references/mistake-29-comparing-values-incorrectly.md)
+
+### 3. Control Structures
+- [Mistake #30: Ignoring that elements are copied in range loops](references/mistake-30-ignoring-that-elements-are-copied-in-range-loops.md)
+- [Mistake #31: Ignoring how arguments are evaluated in range loops](references/mistake-31-ignoring-how-arguments-are-evaluated-in-range-loops-channels-and-arrays.md)
+- [Mistake #32: Ignoring the impacts of using pointer elements in range loops](references/mistake-32-ignoring-the-impacts-of-using-pointer-elements-in-range-loops.md)
+- [Mistake #33: Making wrong assumptions during map iterations](references/mistake-33-making-wrong-assumptions-during-map-iterations-ordering-and-map-insert-during-iteration.md)
+- [Mistake #34: Ignoring how the break statement works](references/mistake-34-ignoring-how-the-break-statement-works.md)
+- [Mistake #35: Using defer inside a loop](references/mistake-35-using-defer-inside-a-loop.md)
+
+### 4. Strings
+- [Mistake #36: Not understanding the concept of rune](references/mistake-36-not-understanding-the-concept-of-rune.md)
+- [Mistake #37: Inaccurate string iteration](references/mistake-37-inaccurate-string-iteration.md)
+- [Mistake #38: Misusing trim functions](references/mistake-38-misusing-trim-functions.md)
+- [Mistake #39: Under-optimized strings concatenation](references/mistake-39-under-optimized-strings-concatenation.md)
+- [Mistake #40: Useless string conversions](references/mistake-40-useless-string-conversions.md)
+- [Mistake #41: Substring and memory leaks](references/mistake-41-substring-and-memory-leaks.md)
+
+### 5. Functions and Methods
+- [Mistake #42: Not knowing which type of receiver to use](references/mistake-42-not-knowing-which-type-of-receiver-to-use.md)
+- [Mistake #43: Never using named result parameters](references/mistake-43-never-using-named-result-parameters.md)
+- [Mistake #44: Unintended side effects with named result parameters](references/mistake-44-unintended-side-effects-with-named-result-parameters.md)
+- [Mistake #45: Returning a nil receiver](references/mistake-45-returning-a-nil-receiver.md)
+- [Mistake #46: Using a filename as a function input](references/mistake-46-using-a-filename-as-a-function-input.md)
+- [Mistake #47: Ignoring how defer arguments and receivers are evaluated](references/mistake-47-ignoring-how-defer-arguments-and-receivers-are-evaluated.md)
+
+### 6. Error Management
+- [Mistake #48: Panicking](references/mistake-48-panicking.md)
+- [Mistake #49: Ignoring when to wrap an error](references/mistake-49-ignoring-when-to-wrap-an-error.md)
+- [Mistake #50: Comparing an error type inaccurately](references/mistake-50-comparing-an-error-type-inaccurately.md)
+- [Mistake #51: Comparing an error value inaccurately](references/mistake-51-comparing-an-error-value-inaccurately.md)
+- [Mistake #52: Handling an error twice](references/mistake-52-handling-an-error-twice.md)
+- [Mistake #53: Not handling an error](references/mistake-53-not-handling-an-error.md)
+- [Mistake #54: Not handling defer errors](references/mistake-54-not-handling-defer-errors.md)
+
+### 7. Concurrency: Foundations
+- [Mistake #55: Mixing up concurrency and parallelism](references/mistake-55-mixing-up-concurrency-and-parallelism.md)
+- [Mistake #56: Thinking concurrency is always faster](references/mistake-56-thinking-concurrency-is-always-faster.md)
+- [Mistake #57: Being puzzled about when to use channels or mutexes](references/mistake-57-being-puzzled-about-when-to-use-channels-or-mutexes.md)
+- [Mistake #58: Not understanding race problems](references/mistake-58-not-understanding-race-problems-data-races-vs-race-conditions.md)
+- [Mistake #59: Not understanding the concurrency impacts of a workload type](references/mistake-59-not-understanding-the-concurrency-impacts-of-a-workload-type.md)
+- [Mistake #60: Misunderstanding Go contexts](references/mistake-60-misunderstanding-go-contexts.md)
+
+### 8. Concurrency: Practice
+- [Mistake #61: Propagating an inappropriate context](references/mistake-61-propagating-an-inappropriate-context.md)
+- [Mistake #62: Starting a goroutine without knowing when to stop it](references/mistake-62-starting-a-goroutine-without-knowing-when-to-stop-it.md)
+- [Mistake #63: Not being careful with goroutines and loop variables](references/mistake-63-not-being-careful-with-goroutines-and-loop-variables.md)
+- [Mistake #64: Expecting a deterministic behavior using select and channels](references/mistake-64-expecting-a-deterministic-behavior-using-select-and-channels.md)
+- [Mistake #65: Not using notification channels](references/mistake-65-not-using-notification-channels.md)
+- [Mistake #66: Not using nil channels](references/mistake-66-not-using-nil-channels.md)
+- [Mistake #67: Being puzzled about channel size](references/mistake-67-being-puzzled-about-channel-size.md)
+- [Mistake #68: Forgetting about possible side effects with string formatting](references/mistake-68-forgetting-about-possible-side-effects-with-string-formatting.md)
+- [Mistake #69: Creating data races with append](references/mistake-69-creating-data-races-with-append.md)
+- [Mistake #70: Using mutexes inaccurately with slices and maps](references/mistake-70-using-mutexes-inaccurately-with-slices-and-maps.md)
+- [Mistake #71: Misusing sync.WaitGroup](references/mistake-71-misusing-syncwaitgroup.md)
+- [Mistake #72: Forgetting about sync.Cond](references/mistake-72-forgetting-about-synccond.md)
+- [Mistake #73: Not using errgroup](references/mistake-73-not-using-errgroup.md)
+- [Mistake #74: Copying a sync type](references/mistake-74-copying-a-sync-type.md)
+
+### 9. Standard Library
+- [Mistake #75: Providing a wrong time duration](references/mistake-75-providing-a-wrong-time-duration.md)
+- [Mistake #76: time.After and memory leaks](references/mistake-76-timeafter-and-memory-leaks.md)
+- [Mistake #77: JSON handling common mistakes](references/mistake-77-json-handling-common-mistakes.md)
+- [Mistake #78: Common SQL mistakes](references/mistake-78-common-sql-mistakes.md)
+- [Mistake #79: Not closing transient resources](references/mistake-79-not-closing-transient-resources-http-body-sqlrows-and-osfile.md)
+- [Mistake #80: Forgetting the return statement after replying to an HTTP request](references/mistake-80-forgetting-the-return-statement-after-replying-to-an-http-request.md)
+- [Mistake #81: Using the default HTTP client and server](references/mistake-81-using-the-default-http-client-and-server.md)
+
+### 10. Testing
+- [Mistake #82: Not categorizing tests](references/mistake-82-not-categorizing-tests-build-tags-environment-variables-and-short-mode.md)
+- [Mistake #83: Not enabling the race flag](references/mistake-83-not-enabling-the-race-flag.md)
+- [Mistake #84: Not using test execution modes](references/mistake-84-not-using-test-execution-modes-parallel-and-shuffle.md)
+- [Mistake #85: Not using table-driven tests](references/mistake-85-not-using-table-driven-tests.md)
+- [Mistake #86: Sleeping in unit tests](references/mistake-86-sleeping-in-unit-tests.md)
+- [Mistake #87: Not dealing with the time API efficiently](references/mistake-87-not-dealing-with-the-time-api-efficiently.md)
+- [Mistake #88: Not using testing utility packages](references/mistake-88-not-using-testing-utility-packages-httptest-and-iotest.md)
+- [Mistake #89: Writing inaccurate benchmarks](references/mistake-89-writing-inaccurate-benchmarks.md)
+- [Mistake #90: Not exploring all the Go testing features](references/mistake-90-not-exploring-all-the-go-testing-features---not-using-fuzzing.md)
+
+### 11. Optimizations
+- [Mistake #91: Not understanding CPU caches](references/mistake-91-not-understanding-cpu-caches.md)
+- [Mistake #92: Writing concurrent code that leads to false sharing](references/mistake-92-writing-concurrent-code-that-leads-to-false-sharing.md)
+- [Mistake #93: Not taking into account instruction-level parallelism](references/mistake-93-not-taking-into-account-instruction-level-parallelism.md)
+- [Mistake #94: Not being aware of data alignment](references/mistake-94-not-being-aware-of-data-alignment.md)
+- [Mistake #95: Not understanding stack vs. heap](references/mistake-95-not-understanding-stack-vs-heap.md)
+- [Mistake #96: Not knowing how to reduce allocations](references/mistake-96-not-knowing-how-to-reduce-allocations.md)
+- [Mistake #97: Not relying on inlining](references/mistake-97-not-relying-on-inlining.md)
+- [Mistake #98: Not using Go diagnostics tooling](references/mistake-98-not-using-go-diagnostics-tooling.md)
+- [Mistake #99: Not understanding how the GC works](references/mistake-99-not-understanding-how-the-gc-works.md)
+- [Mistake #100: Not understanding the impacts of running Go in Docker and Kubernetes](references/mistake-100-not-understanding-the-impacts-of-running-go-in-docker-and-kubernetes.md)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-01-unintended-variable-shadowing.md b/prompts/skills/100-go-mistakes/references/mistake-01-unintended-variable-shadowing.md
new file mode 100644
index 0000000..076039e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-01-unintended-variable-shadowing.md
@@ -0,0 +1,10 @@
+# Mistake #1: Unintended variable shadowing
+
+#### TL;DR
+TL;DR
+
+Avoiding shadowed variables can help prevent mistakes like referencing the wrong variable or confusing readers.
+
+Variable shadowing occurs when a variable name is redeclared in an inner block, but this practice is prone to mistakes. Imposing a rule to forbid shadowed variables depends on personal taste. For example, sometimes it can be convenient to reuse an existing variable name like `err` for errors. Yet, in general, we should remain cautious because we now know that we can face a scenario where the code compiles, but the variable that receives the value is not the one expected.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/1-variable-shadowing/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-02-unnecessary-nested-code.md b/prompts/skills/100-go-mistakes/references/mistake-02-unnecessary-nested-code.md
new file mode 100644
index 0000000..dfd04f3
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-02-unnecessary-nested-code.md
@@ -0,0 +1,45 @@
+# Mistake #2: Unnecessary nested code
+
+#### TL;DR
+TL;DR
+
+Avoiding nested levels and keeping the happy path aligned on the left makes building a mental code model easier.
+
+In general, the more nested levels a function requires, the more complex it is to read and understand. Let’s see some different applications of this rule to optimize our code for readability:
+
+* When an `if` block returns, we should omit the `else` block in all cases. For example, we shouldn’t write:
+
+if foo() {
+    // ...
+    return true
+} else {
+    // ...
+}
+
+Instead, we omit the `else` block like this:
+
+if foo() {
+    // ...
+    return true
+}
+// ...
+
+* We can also follow this logic with a non-happy path:
+
+if s != "" {
+    // ...
+} else {
+    return errors.New("empty string")
+}
+
+Here, an empty `s` represents the non-happy path. Hence, we should flip the
+  condition like so:
+
+if s == "" {
+    return errors.New("empty string")
+}
+// ...
+
+Writing readable code is an important challenge for every developer. Striving to reduce the number of nested blocks, aligning the happy path on the left, and returning as early as possible are concrete means to improve our code’s readability.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/2-nested-code/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-03-misusing-init-functions.md b/prompts/skills/100-go-mistakes/references/mistake-03-misusing-init-functions.md
new file mode 100644
index 0000000..805677e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-03-misusing-init-functions.md
@@ -0,0 +1,18 @@
+# Mistake #3: Misusing init functions
+
+#### TL;DR
+TL;DR
+
+When initializing variables, remember that init functions have limited error handling and make state handling and testing more complex. In most cases, initializations should be handled as specific functions.
+
+An init function is a function used to initialize the state of an application. It takes no arguments and returns no result (a `func()` function). When a package is initialized, all the constant and variable declarations in the package are evaluated. Then, the init functions are executed.
+
+Init functions can lead to some issues:
+
+* They can limit error management.
+* They can complicate how to implement tests (for example, an external dependency must be set up, which may not be necessary for the scope of unit tests).
+* If the initialization requires us to set a state, that has to be done through global variables.
+
+We should be cautious with init functions. They can be helpful in some situations, however, such as defining static configuration. Otherwise, and in most cases, we should handle initializations through ad hoc functions.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/3-init-functions/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-04-overusing-getters-and-setters.md b/prompts/skills/100-go-mistakes/references/mistake-04-overusing-getters-and-setters.md
new file mode 100644
index 0000000..a93dffc
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-04-overusing-getters-and-setters.md
@@ -0,0 +1,12 @@
+# Mistake #4: Overusing getters and setters
+
+#### TL;DR
+TL;DR
+
+Forcing the use of getters and setters isn’t idiomatic in Go. Being pragmatic and finding the right balance between efficiency and blindly following certain idioms should be the way to go.
+
+Data encapsulation refers to hiding the values or state of an object. Getters and setters are means to enable encapsulation by providing exported methods on top of unexported object fields.
+
+In Go, there is no automatic support for getters and setters as we see in some languages. It is also considered neither mandatory nor idiomatic to use getters and setters to access struct fields. We shouldn’t overwhelm our code with getters and setters on structs if they don’t bring any value. We should be pragmatic and strive to find the right balance between efficiency and following idioms that are sometimes considered indisputable in other programming paradigms.
+
+Remember that Go is a unique language designed for many characteristics, including simplicity. However, if we find a need for getters and setters or, as mentioned, foresee a future need while guaranteeing forward compatibility, there’s nothing wrong with using them.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-05-interface-pollution.md b/prompts/skills/100-go-mistakes/references/mistake-05-interface-pollution.md
new file mode 100644
index 0000000..00c9738
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-05-interface-pollution.md
@@ -0,0 +1,10 @@
+# Mistake #5: Interface pollution
+
+#### TL;DR
+TL;DR
+
+Abstractions should be discovered, not created. To prevent unnecessary complexity, create an interface when you need it and not when you foresee needing it, or if you can at least prove the abstraction to be a valid one.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/5-interface-pollution/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-06-interface-on-the-producer-side.md b/prompts/skills/100-go-mistakes/references/mistake-06-interface-on-the-producer-side.md
new file mode 100644
index 0000000..d77acb7
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-06-interface-on-the-producer-side.md
@@ -0,0 +1,12 @@
+# Mistake #6: Interface on the producer side
+
+#### TL;DR
+TL;DR
+
+Keeping interfaces on the client side avoids unnecessary abstractions.
+
+Interfaces are satisfied implicitly in Go, which tends to be a gamechanger compared to languages with an explicit implementation. In most cases, the approach to follow is similar to what we described in the previous section: abstractions should be discovered, not created. This means that it’s not up to the producer to force a given abstraction for all the clients. Instead, it’s up to the client to decide whether it needs some form of abstraction and then determine the best abstraction level for its needs.
+
+An interface should live on the consumer side in most cases. However, in particular contexts (for example, when we know—not foresee—that an abstraction will be helpful for consumers), we may want to have it on the producer side. If we do, we should strive to keep it as minimal as possible, increasing its reusability potential and making it more easily composable.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/6-interface-producer/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-07-returning-interfaces.md b/prompts/skills/100-go-mistakes/references/mistake-07-returning-interfaces.md
new file mode 100644
index 0000000..f7c4fca
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-07-returning-interfaces.md
@@ -0,0 +1,8 @@
+# Mistake #7: Returning interfaces
+
+#### TL;DR
+TL;DR
+
+To prevent being restricted in terms of flexibility, a function shouldn’t return interfaces but concrete implementations in most cases. Conversely, a function should accept interfaces whenever possible.
+
+In most cases, we shouldn’t return interfaces but concrete implementations. Otherwise, it can make our design more complex due to package dependencies and can restrict flexibility because all the clients would have to rely on the same abstraction. Again, the conclusion is similar to the previous sections: if we know (not foresee) that an abstraction will be helpful for clients, we can consider returning an interface. Otherwise, we shouldn’t force abstractions; they should be discovered by clients. If a client needs to abstract an implementation for whatever reason, it can still do that on the client’s side.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-08-any-says-nothing.md b/prompts/skills/100-go-mistakes/references/mistake-08-any-says-nothing.md
new file mode 100644
index 0000000..af8a478
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-08-any-says-nothing.md
@@ -0,0 +1,3 @@
+# Mistake #8: any says nothing
+
+[Documentation for mistake #8 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-09-being-confused-about-when-to-use-generics.md b/prompts/skills/100-go-mistakes/references/mistake-09-being-confused-about-when-to-use-generics.md
new file mode 100644
index 0000000..64e10ce
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-09-being-confused-about-when-to-use-generics.md
@@ -0,0 +1,10 @@
+# Mistake #9: Being confused about when to use generics
+
+#### TL;DR
+TL;DR
+
+Relying on generics and type parameters can prevent writing boilerplate code to factor out elements or behaviors. However, do not use type parameters prematurely, but only when you see a concrete need for them. Otherwise, they introduce unnecessary abstractions and complexity.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/9-generics/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-10-not-being-aware-of-the-possible-problems-with-type-embedding.md b/prompts/skills/100-go-mistakes/references/mistake-10-not-being-aware-of-the-possible-problems-with-type-embedding.md
new file mode 100644
index 0000000..28f1864
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-10-not-being-aware-of-the-possible-problems-with-type-embedding.md
@@ -0,0 +1,34 @@
+# Mistake #10: Not being aware of the possible problems with type embedding
+
+#### TL;DR
+TL;DR
+
+Using type embedding can also help avoid boilerplate code; however, ensure that doing so doesn’t lead to visibility issues where some fields should have remained hidden.
+
+When creating a struct, Go offers the option to embed types. But this can sometimes lead to unexpected behaviors if we don’t understand all the implications of type embedding. Throughout this section, we look at how to embed types, what these bring, and the possible issues.
+
+In Go, a struct field is called embedded if it’s declared without a name. For example,
+
+type Foo struct {
+    Bar // Embedded field
+}
+
+type Bar struct {
+    Baz int
+}
+
+In the `Foo` struct, the `Bar` type is declared without an associated name; hence, it’s an embedded field.
+
+We use embedding to promote the fields and methods of an embedded type. Because `Bar` contains a `Baz` field, this field is
+promoted to `Foo`. Therefore, `Baz` becomes available from `Foo`.
+
+What can we say about type embedding? First, let’s note that it’s rarely a necessity, and it means that whatever the use case, we can probably solve it as well without type embedding. Type embedding is mainly used for convenience: in most cases, to promote behaviors.
+
+If we decide to use type embedding, we need to keep two main constraints in mind:
+
+* It shouldn’t be used solely as some syntactic sugar to simplify accessing a field (such as `Foo.Baz()` instead of `Foo.Bar.Baz()`). If this is the only rationale, let’s not embed the inner type and use a field instead.
+* It shouldn’t promote data (fields) or a behavior (methods) we want to hide from the outside: for example, if it allows clients to access a locking behavior that should remain private to the struct.
+
+Using type embedding consciously by keeping these constraints in mind can help avoid boilerplate code with additional forwarding methods. However, let’s make sure we don’t do it solely for cosmetics and not promote elements that should remain hidden.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/10-type-embedding/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-100-not-understanding-the-impacts-of-running-go-in-docker-and-kubernetes.md b/prompts/skills/100-go-mistakes/references/mistake-100-not-understanding-the-impacts-of-running-go-in-docker-and-kubernetes.md
new file mode 100644
index 0000000..a31b72a
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-100-not-understanding-the-impacts-of-running-go-in-docker-and-kubernetes.md
@@ -0,0 +1,3 @@
+# Mistake #100: Not understanding the impacts of running Go in Docker and Kubernetes
+
+[Documentation for mistake #100 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-11-not-using-the-functional-options-pattern.md b/prompts/skills/100-go-mistakes/references/mistake-11-not-using-the-functional-options-pattern.md
new file mode 100644
index 0000000..56f7cae
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-11-not-using-the-functional-options-pattern.md
@@ -0,0 +1,56 @@
+# Mistake #11: Not using the functional options pattern
+
+#### TL;DR
+TL;DR
+
+To handle options conveniently and in an API-friendly manner, use the functional options pattern.
+
+Although there are different implementations with minor variations, the main idea is as follows:
+
+* An unexported struct holds the configuration: options.
+* Each option is a function that returns the same type: `type Option func(options *options) error`. For example, `WithPort` accepts an `int` argument that represents the port and returns an `Option` type that represents how to update the `options` struct.
+
+type options struct {
+  port *int
+}
+
+type Option func(options *options) error
+
+func WithPort(port int) Option {
+  return func(options *options) error {
+    if port < 0 {
+      return errors.New("port should be positive")
+    }
+    options.port = &port
+    return nil
+  }
+}
+
+func NewServer(addr string, opts ...Option) ( *http.Server, error) {
+  var options options
+  for _, opt := range opts {
+    err := opt(&options)
+    if err != nil {
+      return nil, err
+    }
+  }
+
+  // At this stage, the options struct is built and contains the config
+  // Therefore, we can implement our logic related to port configuration
+  var port int
+  if options.port == nil {
+    port = defaultHTTPPort
+  } else {
+    if *options.port == 0 {
+      port = randomPort()
+    } else {
+      port = *options.port
+    }
+  }
+
+  // ...
+}
+
+The functional options pattern provides a handy and API-friendly way to handle options. Although the builder pattern can be a valid option, it has some minor downsides (having to pass a config struct that can be empty or a less handy way to handle error management) that tend to make the functional options pattern the idiomatic way to deal with these kind of problems in Go.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/11-functional-options/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-12-project-misorganization-project-structure-and-package-organization.md b/prompts/skills/100-go-mistakes/references/mistake-12-project-misorganization-project-structure-and-package-organization.md
new file mode 100644
index 0000000..53de0bd
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-12-project-misorganization-project-structure-and-package-organization.md
@@ -0,0 +1,17 @@
+# Mistake #12: Project misorganization (project structure and package organization)
+
+Regarding the overall organization, there are different schools of thought. For example, should we organize our application by context or by layer? It depends on our preferences. We may favor grouping code per context (such as the customer context, the contract context, etc.), or we may favor following hexagonal architecture principles and group per technical layer. If the decision we make fits our use case, it cannot be a wrong decision, as long as we remain consistent with it.
+
+Regarding packages, there are multiple best practices that we should follow. First, we should avoid premature packaging because it might cause us to overcomplicate a project. Sometimes, it’s better to use a simple organization and have our project evolve when we understand what it contains rather than forcing ourselves to make the perfect structure up front.
+Granularity is another essential thing to consider. We should avoid having dozens of nano packages containing only one or two files. If we do, it’s because we have probably missed some logical connections across these packages, making our project harder for readers to understand. Conversely, we should also avoid huge packages that dilute the meaning of a package name.
+
+Package naming should also be considered with care. As we all know (as developers), naming is hard. To help clients understand a Go project, we should name our packages after what they provide, not what they contain. Also, naming should be meaningful. Therefore, a package name should be short, concise, expressive, and, by convention, a single lowercase word.
+
+Regarding what to export, the rule is pretty straightforward. We should minimize what should be exported as much as possible to reduce the coupling between packages and keep unnecessary exported elements hidden. If we are unsure whether to export an element or not, we should default to not exporting it. Later, if we discover that we need to export it, we can adjust our code. Let’s also keep in mind some exceptions, such as making fields exported so that a struct can be unmarshaled with encoding/json.
+
+Organizing a project isn’t straightforward, but following these rules should help make it easier to maintain. However, remember that consistency is also vital to ease maintainability. Therefore, let’s make sure that we keep things as consistent as possible within a codebase.
+
+#### TL;DR
+Note
+
+In 2023, the Go team has published an official guideline for organizing / structuring a Go project: go.dev/doc/modules/layout
diff --git a/prompts/skills/100-go-mistakes/references/mistake-13-creating-utility-packages.md b/prompts/skills/100-go-mistakes/references/mistake-13-creating-utility-packages.md
new file mode 100644
index 0000000..5b45254
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-13-creating-utility-packages.md
@@ -0,0 +1,10 @@
+# Mistake #13: Creating utility packages
+
+#### TL;DR
+TL;DR
+
+Naming is a critical piece of application design. Creating packages such as `common`, `util`, and `shared` doesn’t bring much value for the reader. Refactor such packages into meaningful and specific package names.
+
+Also, bear in mind that naming a package after what it provides and not what it contains can be an efficient way to increase its expressiveness.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/02-code-project-organization/13-utility-packages/stringset.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-14-ignoring-package-name-collisions.md b/prompts/skills/100-go-mistakes/references/mistake-14-ignoring-package-name-collisions.md
new file mode 100644
index 0000000..98a050c
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-14-ignoring-package-name-collisions.md
@@ -0,0 +1,8 @@
+# Mistake #14: Ignoring package name collisions
+
+#### TL;DR
+TL;DR
+
+To avoid naming collisions between variables and packages, leading to confusion or perhaps even bugs, use unique names for each one. If this isn’t feasible, use an import alias to change the qualifier to differentiate the package name from the variable name, or think of a better name.
+
+Package collisions occur when a variable name collides with an existing package name, preventing the package from being reused. We should prevent variable name collisions to avoid ambiguity. If we face a collision, we should either find another meaningful name or use an import alias.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-15-missing-code-documentation.md b/prompts/skills/100-go-mistakes/references/mistake-15-missing-code-documentation.md
new file mode 100644
index 0000000..2151605
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-15-missing-code-documentation.md
@@ -0,0 +1,18 @@
+# Mistake #15: Missing code documentation
+
+#### TL;DR
+TL;DR
+
+To help clients and maintainers understand your code’s purpose, document exported elements.
+
+Documentation is an important aspect of coding. It simplifies how clients can consume an API but can also help in maintaining a project. In Go, we should follow some rules to make our code idiomatic:
+
+First, every exported element must be documented. Whether it is a structure, an interface, a function, or something else, if it’s exported, it must be documented. The convention is to add comments, starting with the name of the exported element.
+
+As a convention, each comment should be a complete sentence that ends with punctuation. Also bear in mind that when we document a function (or a method), we should highlight what the function intends to do, not how it does it; this belongs to the core of a function and comments, not documentation. Furthermore, the documentation should ideally provide enough information that the consumer does not have to look at our code to understand how to use an exported element.
+
+When it comes to documenting a variable or a constant, we might be interested in conveying two aspects: its purpose and its content. The former should live as code documentation to be useful for external clients. The latter, though, shouldn’t necessarily be public.
+
+To help clients and maintainers understand a package’s scope, we should also document each package. The convention is to start the comment with `// Package` followed by the package name. The first line of a package comment should be concise. That’s because it will appear in the package. Then, we can provide all the information we need in the following lines.
+
+Documenting our code shouldn’t be a constraint. We should take the opportunity to make sure it helps clients and maintainers to understand the purpose of our code.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-16-not-using-linters.md b/prompts/skills/100-go-mistakes/references/mistake-16-not-using-linters.md
new file mode 100644
index 0000000..440e0c5
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-16-not-using-linters.md
@@ -0,0 +1,24 @@
+# Mistake #16: Not using linters
+
+#### TL;DR
+TL;DR
+
+To improve code quality and consistency, use linters and formatters.
+
+A linter is an automatic tool to analyze code and catch errors. The scope of this section isn’t to give an exhaustive list of the existing linters; otherwise, it will become deprecated pretty quickly. But we should understand and remember why linters are essential for most Go projects.
+
+However, if you’re not a regular user of linters, here is a list that you may want to use daily:
+
+* https://golang.org/cmd/vet—A standard Go analyzer
+* https://github.com/kisielk/errcheck—An error checker
+* https://github.com/fzipp/gocyclo—A cyclomatic complexity analyzer
+* https://github.com/jgautheron/goconst—A repeated string constants analyzer
+
+Besides linters, we should also use code formatters to fix code style. Here is a list of some code formatters for you to try:
+
+* https://golang.org/cmd/gofmt—A standard Go code formatter
+* https://godoc.org/golang.org/x/tools/cmd/goimports—A standard Go imports formatter
+
+Meanwhile, we should also look at golangci-lint (https://github.com/golangci/golangci-lint). It’s a linting tool that provides a facade on top of many useful linters and formatters. Also, it allows running the linters in parallel to improve analysis speed, which is quite handy.
+
+Linters and formatters are a powerful way to improve the quality and consistency of our codebase. Let’s take the time to understand which one we should use and make sure we automate their execution (such as a CI or Git precommit hook).
diff --git a/prompts/skills/100-go-mistakes/references/mistake-17-creating-confusion-with-octal-literals.md b/prompts/skills/100-go-mistakes/references/mistake-17-creating-confusion-with-octal-literals.md
new file mode 100644
index 0000000..7c89902
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-17-creating-confusion-with-octal-literals.md
@@ -0,0 +1,18 @@
+# Mistake #17: Creating confusion with octal literals
+
+#### TL;DR
+TL;DR
+
+When reading existing code, bear in mind that integer literals starting with `0` are octal numbers. Also, to improve readability, make octal integers explicit by prefixing them with `0o`.
+
+Octal numbers start with a 0 (e.g., `010` is equal to 8 in base 10). To improve readability and avoid potential mistakes for future code readers, we should make octal numbers explicit using the `0o` prefix (e.g., `0o10`).
+
+We should also note the other integer literal representations:
+
+* Binary—Uses a `0b` or `0B` prefix (for example, `0b100` is equal to 4 in base 10)
+* Hexadecimal—Uses an `0x` or `0X` prefix (for example, `0xF` is equal to 15 in base 10)
+* Imaginary—Uses an `i` suffix (for example, `3i`)
+
+We can also use an underscore character (_) as a separator for readability. For example, we can write 1 billion this way: `1_000_000_000`. We can also use the underscore character with other representations (for example, `0b00_00_01`).
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/17-octal-literals/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-18-neglecting-integer-overflows.md b/prompts/skills/100-go-mistakes/references/mistake-18-neglecting-integer-overflows.md
new file mode 100644
index 0000000..8ab3127
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-18-neglecting-integer-overflows.md
@@ -0,0 +1,16 @@
+# Mistake #18: Neglecting integer overflows
+
+#### TL;DR
+TL;DR
+
+Because integer overflows and underflows are handled silently in Go, you can implement your own functions to catch them.
+
+In Go, an integer overflow that can be detected at compile time generates a compilation error. For example,
+
+var counter int32 = math.MaxInt32 + 1
+
+constant 2147483648 overflows int32
+
+However, at run time, an integer overflow or underflow is silent; this does not lead to an application panic. It is essential to keep this behavior in mind, because it can lead to sneaky bugs (for example, an integer increment or addition of positive integers that leads to a negative result).
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/18-integer-overflows)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-19-not-understanding-floating-points.md b/prompts/skills/100-go-mistakes/references/mistake-19-not-understanding-floating-points.md
new file mode 100644
index 0000000..e95be48
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-19-not-understanding-floating-points.md
@@ -0,0 +1,23 @@
+# Mistake #19: Not understanding floating-points
+
+#### TL;DR
+TL;DR
+
+Making floating-point comparisons within a given delta can ensure that your code is portable. When performing addition or subtraction, group the operations with a similar order of magnitude to favor accuracy. Also, perform multiplication and division before addition and subtraction.
+
+In Go, there are two floating-point types (if we omit imaginary numbers): float32 and float64. The concept of a floating point was invented to solve the major problem with integers: their inability to represent fractional values. To avoid bad surprises, we need to know that floating-point arithmetic is an approximation of real arithmetic.
+
+For that, we’ll look at a multiplication example:
+
+var n float32 = 1.0001
+fmt.Println(n * n)
+
+We may expect this code to print the result of 1.0001 * 1.0001 = 1.00020001, right? However, running it on most x86 processors prints 1.0002, instead.
+
+Because Go’s `float32` and `float64` types are approximations, we have to bear a few rules in mind:
+
+* When comparing two floating-point numbers, check that their difference is within an acceptable range.
+* When performing additions or subtractions, group operations with a similar order of magnitude for better accuracy.
+* To favor accuracy, if a sequence of operations requires addition, subtraction, multiplication, or division, perform the multiplication and division operations first.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/19-floating-points/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-20-not-understanding-slice-length-and-capacity.md b/prompts/skills/100-go-mistakes/references/mistake-20-not-understanding-slice-length-and-capacity.md
new file mode 100644
index 0000000..473d0e2
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-20-not-understanding-slice-length-and-capacity.md
@@ -0,0 +1,10 @@
+# Mistake #20: Not understanding slice length and capacity
+
+#### TL;DR
+TL;DR
+
+Understanding the difference between slice length and capacity should be part of a Go developer’s core knowledge. The slice length is the number of available elements in the slice, whereas the slice capacity is the number of elements in the backing array.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/20-slice-length-cap/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-21-inefficient-slice-initialization.md b/prompts/skills/100-go-mistakes/references/mistake-21-inefficient-slice-initialization.md
new file mode 100644
index 0000000..49f3a4e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-21-inefficient-slice-initialization.md
@@ -0,0 +1,12 @@
+# Mistake #21: Inefficient slice initialization
+
+#### TL;DR
+TL;DR
+
+When creating a slice, initialize it with a given length or capacity if its length is already known. This reduces the number of allocations and improves performance.
+
+While initializing a slice using `make`, we can provide a length and an optional capacity. Forgetting to pass an appropriate value for both of these parameters when it makes sense is a widespread mistake. Indeed, it can lead to multiple copies and additional effort for the GC to clean the temporary backing arrays. Performance-wise, there’s no good reason not to give the Go runtime a helping hand.
+
+Our options are to allocate a slice with either a given capacity or a given length. Of these two solutions, we have seen that the second tends to be slightly faster. But using a given capacity and append can be easier to implement and read in some contexts.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/21-slice-init/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-22-being-confused-about-nil-vs-empty-slice.md b/prompts/skills/100-go-mistakes/references/mistake-22-being-confused-about-nil-vs-empty-slice.md
new file mode 100644
index 0000000..f850dbc
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-22-being-confused-about-nil-vs-empty-slice.md
@@ -0,0 +1,16 @@
+# Mistake #22: Being confused about nil vs. empty slice
+
+#### TL;DR
+TL;DR
+
+To prevent common confusions such as when using the `encoding/json` or the `reflect` package, you need to understand the difference between nil and empty slices. Both are zero-length, zero-capacity slices, but only a nil slice doesn’t require allocation.
+
+In Go, there is a distinction between nil and empty slices. A nil slice is equals to `nil`, whereas an empty slice has a length of zero. A nil slice is empty, but an empty slice isn’t necessarily `nil`. Meanwhile, a nil slice doesn’t require any allocation. We have seen throughout this section how to initialize a slice depending on the context by using
+
+* `var s []string` if we aren’t sure about the final length and the slice can be empty
+* `[]string(nil)` as syntactic sugar to create a nil and empty slice
+* `make([]string, length)` if the future length is known
+
+The last option, `[]string{}`, should be avoided if we initialize the slice without elements. Finally, let’s check whether the libraries we use make the distinctions between nil and empty slices to prevent unexpected behaviors.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/22-nil-empty-slice/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-23-not-properly-checking-if-a-slice-is-empty.md b/prompts/skills/100-go-mistakes/references/mistake-23-not-properly-checking-if-a-slice-is-empty.md
new file mode 100644
index 0000000..25c6f29
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-23-not-properly-checking-if-a-slice-is-empty.md
@@ -0,0 +1,12 @@
+# Mistake #23: Not properly checking if a slice is empty
+
+#### TL;DR
+TL;DR
+
+To check if a slice doesn’t contain any element, check its length. This check works regardless of whether the slice is `nil` or empty. The same goes for maps. To design unambiguous APIs, you shouldn’t distinguish between nil and empty slices.
+
+To determine whether a slice has elements, we can either do it by checking if the slice is nil or if its length is equal to 0. Checking the length is the best option to follow as it will cover both if the slice is empty or if the slice is nil.
+
+Meanwhile, when designing interfaces, we should avoid distinguishing nil and empty slices, which leads to subtle programming errors. When returning slices, it should make neither a semantic nor a technical difference if we return a nil or empty slice. Both should mean the same thing for the callers. This principle is the same with maps. To check if a map is empty, check its length, not whether it’s nil.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/23-checking-slice-empty/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-24-not-making-slice-copies-correctly.md b/prompts/skills/100-go-mistakes/references/mistake-24-not-making-slice-copies-correctly.md
new file mode 100644
index 0000000..a16b53f
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-24-not-making-slice-copies-correctly.md
@@ -0,0 +1,10 @@
+# Mistake #24: Not making slice copies correctly
+
+#### TL;DR
+TL;DR
+
+To copy one slice to another using the `copy` built-in function, remember that the number of copied elements corresponds to the minimum between the two slice’s lengths.
+
+Copying elements from one slice to another is a reasonably frequent operation. When using copy, we must recall that the number of elements copied to the destination corresponds to the minimum between the two slices’ lengths. Also bear in mind that other alternatives exist to copy a slice, so we shouldn’t be surprised if we find them in a codebase.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/24-slice-copy/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-25-unexpected-side-effects-using-slice-append.md b/prompts/skills/100-go-mistakes/references/mistake-25-unexpected-side-effects-using-slice-append.md
new file mode 100644
index 0000000..e1b513d
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-25-unexpected-side-effects-using-slice-append.md
@@ -0,0 +1,15 @@
+# Mistake #25: Unexpected side effects using slice append
+
+#### TL;DR
+TL;DR
+
+Using copy or the full slice expression is a way to prevent `append` from creating conflicts if two different functions use slices backed by the same array. However, only a slice copy prevents memory leaks if you want to shrink a large slice.
+
+When using slicing, we must remember that we can face a situation leading to unintended side effects. If the resulting slice has a length smaller than its capacity, append can mutate the original slice. If we want to restrict the range of possible side effects, we can use either a slice copy or the full slice expression, which prevents us from doing a copy.
+
+#### TL;DR
+Note
+
+`s[low:high:max]` (full slice expression): This statement creates a slice similar to the one created with `s[low:high]`, except that the resulting slice’s capacity is equal to `max - low`.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/25-slice-append/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-26-slices-and-memory-leaks.md b/prompts/skills/100-go-mistakes/references/mistake-26-slices-and-memory-leaks.md
new file mode 100644
index 0000000..a5cd33e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-26-slices-and-memory-leaks.md
@@ -0,0 +1,18 @@
+# Mistake #26: Slices and memory leaks
+
+#### TL;DR
+TL;DR
+
+Working with a slice of pointers or structs with pointer fields, you can avoid memory leaks by marking as nil the elements excluded by a slicing operation.
+
+Leaking capacity
+
+Remember that slicing a large slice or array can lead to potential high memory consumption. The remaining space won’t be reclaimed by the GC, and we can keep a large backing array despite using only a few elements. Using a slice copy is the solution to prevent such a case.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/26-slice-memory-leak/capacity-leak)
+
+Slice and pointers
+
+When we use the slicing operation with pointers or structs with pointer fields, we need to know that the GC won’t reclaim these elements. In that case, the two options are to either perform a copy or explicitly mark the remaining elements or their fields to `nil`.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/26-slice-memory-leak/slice-pointers)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-27-inefficient-map-initialization.md b/prompts/skills/100-go-mistakes/references/mistake-27-inefficient-map-initialization.md
new file mode 100644
index 0000000..bff64ac
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-27-inefficient-map-initialization.md
@@ -0,0 +1,12 @@
+# Mistake #27: Inefficient map initialization
+
+#### TL;DR
+TL;DR
+
+When creating a map, initialize it with a given length if its length is already known. This reduces the number of allocations and improves performance.
+
+A map provides an unordered collection of key-value pairs in which all the keys are distinct. In Go, a map is based on the hash table data structure. Internally, a hash table is an array of buckets, and each bucket is a pointer to an array of key-value pairs.
+
+If we know up front the number of elements a map will contain, we should create it by providing an initial size. Doing this avoids potential map growth, which is quite heavy computation-wise because it requires reallocating enough space and rebalancing all the elements.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/27-map-init/main_test.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-28-maps-and-memory-leaks.md b/prompts/skills/100-go-mistakes/references/mistake-28-maps-and-memory-leaks.md
new file mode 100644
index 0000000..b281d21
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-28-maps-and-memory-leaks.md
@@ -0,0 +1,10 @@
+# Mistake #28: Maps and memory leaks
+
+#### TL;DR
+TL;DR
+
+A map can always grow in memory, but it never shrinks. Hence, if it leads to some memory issues, you can try different options, such as forcing Go to recreate the map or using pointers.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/28-map-memory-leak/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-29-comparing-values-incorrectly.md b/prompts/skills/100-go-mistakes/references/mistake-29-comparing-values-incorrectly.md
new file mode 100644
index 0000000..2d99d7e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-29-comparing-values-incorrectly.md
@@ -0,0 +1,28 @@
+# Mistake #29: Comparing values incorrectly
+
+#### TL;DR
+TL;DR
+
+To compare types in Go, you can use the == and != operators if two types are comparable: Booleans, numerals, strings, pointers, channels, and structs are composed entirely of comparable types. Otherwise, you can either use `reflect.DeepEqual` and pay the price of reflection or use custom implementations and libraries.
+
+It’s essential to understand how to use `==` and `!=` to make comparisons effectively. We can use these operators on operands that are comparable:
+
+* Booleans—Compare whether two Booleans are equal.
+* Numerics (int, float, and complex types)—Compare whether two numerics are equal.
+* Strings—Compare whether two strings are equal.
+* Channels—Compare whether two channels were created by the same call to make or if both are nil.
+* Interfaces—Compare whether two interfaces have identical dynamic types and equal dynamic values or if both are nil.
+* Pointers—Compare whether two pointers point to the same value in memory or if both are nil.
+* Structs and arrays—Compare whether they are composed of similar types.
+
+#### TL;DR
+Note
+
+We can also use the `?`, `>=`, `<`, and `>` operators with numeric types to compare values and with strings to compare their lexical order.
+
+If operands are not comparable (e.g., slices and maps), we have to use other options such as reflection. Reflection is a form of metaprogramming, and it refers to the ability of an application to introspect and modify its structure and behavior. For example, in Go, we can use `reflect.DeepEqual`. This function reports whether two elements are deeply equal by recursively traversing two values. The elements it accepts are basic types plus arrays, structs, slices, maps, pointers, interfaces, and functions. Yet, the main catch is the performance penalty.
+
+If performance is crucial at run time, implementing our custom method might be the best solution.
+One additional note: we must remember that the standard library has some existing comparison methods. For example, we can use the optimized `bytes.Compare` function to compare two slices of bytes. Before implementing a custom method, we need to make sure we don’t reinvent the wheel.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/03-data-types/29-comparing-values/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-30-ignoring-that-elements-are-copied-in-range-loops.md b/prompts/skills/100-go-mistakes/references/mistake-30-ignoring-that-elements-are-copied-in-range-loops.md
new file mode 100644
index 0000000..32d79c5
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-30-ignoring-that-elements-are-copied-in-range-loops.md
@@ -0,0 +1,3 @@
+# Mistake #30: Ignoring that elements are copied in range loops
+
+[Documentation for mistake #30 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-31-ignoring-how-arguments-are-evaluated-in-range-loops-channels-and-arrays.md b/prompts/skills/100-go-mistakes/references/mistake-31-ignoring-how-arguments-are-evaluated-in-range-loops-channels-and-arrays.md
new file mode 100644
index 0000000..9775d58
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-31-ignoring-how-arguments-are-evaluated-in-range-loops-channels-and-arrays.md
@@ -0,0 +1,3 @@
+# Mistake #31: Ignoring how arguments are evaluated in range loops (channels and arrays)
+
+[Documentation for mistake #31 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-32-ignoring-the-impacts-of-using-pointer-elements-in-range-loops.md b/prompts/skills/100-go-mistakes/references/mistake-32-ignoring-the-impacts-of-using-pointer-elements-in-range-loops.md
new file mode 100644
index 0000000..bad6234
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-32-ignoring-the-impacts-of-using-pointer-elements-in-range-loops.md
@@ -0,0 +1,3 @@
+# Mistake #32: Ignoring the impacts of using pointer elements in range loops
+
+[Documentation for mistake #32 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-33-making-wrong-assumptions-during-map-iterations-ordering-and-map-insert-during-iteration.md b/prompts/skills/100-go-mistakes/references/mistake-33-making-wrong-assumptions-during-map-iterations-ordering-and-map-insert-during-iteration.md
new file mode 100644
index 0000000..b5eafb8
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-33-making-wrong-assumptions-during-map-iterations-ordering-and-map-insert-during-iteration.md
@@ -0,0 +1,13 @@
+# Mistake #33: Making wrong assumptions during map iterations (ordering and map insert during iteration)
+
+#### TL;DR
+TL;DR
+
+To ensure predictable outputs when using maps, remember that a map data structure:
+
+* Doesn’t order the data by keys
+* Doesn’t preserve the insertion order
+* Doesn’t have a deterministic iteration order
+* Doesn’t guarantee that an element added during an iteration will be produced during this iteration
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/04-control-structures/33-map-iteration/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-34-ignoring-how-the-break-statement-works.md b/prompts/skills/100-go-mistakes/references/mistake-34-ignoring-how-the-break-statement-works.md
new file mode 100644
index 0000000..9bdb601
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-34-ignoring-how-the-break-statement-works.md
@@ -0,0 +1,3 @@
+# Mistake #34: Ignoring how the break statement works
+
+[Documentation for mistake #34 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-35-using-defer-inside-a-loop.md b/prompts/skills/100-go-mistakes/references/mistake-35-using-defer-inside-a-loop.md
new file mode 100644
index 0000000..54b3a20
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-35-using-defer-inside-a-loop.md
@@ -0,0 +1,3 @@
+# Mistake #35: Using defer inside a loop
+
+[Documentation for mistake #35 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-36-not-understanding-the-concept-of-rune.md b/prompts/skills/100-go-mistakes/references/mistake-36-not-understanding-the-concept-of-rune.md
new file mode 100644
index 0000000..d3f174f
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-36-not-understanding-the-concept-of-rune.md
@@ -0,0 +1,17 @@
+# Mistake #36: Not understanding the concept of rune
+
+#### TL;DR
+TL;DR
+
+Understanding that a rune corresponds to the concept of a Unicode code point and that it can be composed of multiple bytes should be part of the Go developer’s core knowledge to work accurately with strings.
+
+As runes are everywhere in Go, it's important to understand the following:
+
+* A charset is a set of characters, whereas an encoding describes how to translate a charset into binary.
+* In Go, a string references an immutable slice of arbitrary bytes.
+* Go source code is encoded using UTF-8. Hence, all string literals are UTF-8 strings. But because a string can contain arbitrary bytes, if it’s obtained from somewhere else (not the source code), it isn’t guaranteed to be based on the UTF-8 encoding.
+* A `rune` corresponds to the concept of a Unicode code point, meaning an item represented by a single value.
+* Using UTF-8, a Unicode code point can be encoded into 1 to 4 bytes.
+* Using `len()` on a string in Go returns the number of bytes, not the number of runes.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/05-strings/36-rune/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-37-inaccurate-string-iteration.md b/prompts/skills/100-go-mistakes/references/mistake-37-inaccurate-string-iteration.md
new file mode 100644
index 0000000..9693598
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-37-inaccurate-string-iteration.md
@@ -0,0 +1,60 @@
+# Mistake #37: Inaccurate string iteration
+
+#### TL;DR
+TL;DR
+
+Iterating on a string with the `range` operator iterates on the runes with the index corresponding to the starting index of the rune’s byte sequence. To access a specific rune index (such as the third rune), convert the string into a `[]rune`.
+
+Iterating on a string is a common operation for developers. Perhaps we want to perform an operation for each rune in the string or implement a custom function to search for a specific substring. In both cases, we have to iterate on the different runes of a string. But it’s easy to get confused about how iteration works.
+
+For example, consider the following example:
+
+s := "hêllo"
+for i := range s {
+    fmt.Printf("position %d: %c\n", i, s[i])
+}
+fmt.Printf("len=%d\n", len(s))
+
+position 0: h
+position 1: Ã
+position 3: l
+position 4: l
+position 5: o
+len=6
+
+Let's highlight three points that might be confusing:
+
+* The second rune is à in the output instead of ê.
+* We jumped from position 1 to position 3: what is at position 2?
+* len returns a count of 6, whereas s contains only 5 runes.
+
+Let’s start with the last observation. We already mentioned that len returns the number of bytes in a string, not the number of runes. Because we assigned a string literal to `s`, `s` is a UTF-8 string. Meanwhile, the special character "ê" isn’t encoded in a single byte; it requires 2 bytes. Therefore, calling `len(s)` returns 6.
+
+Meanwhile, in the previous example, we have to understand that we don't iterate over each rune; instead, we iterate over each starting index of a rune:
+
+Printing `s[i]` doesn’t print the ith rune; it prints the UTF-8 representation of the byte at index `i`. Hence, we printed "hÃllo" instead of "hêllo".
+
+If we want to print all the different runes, we can either use the value element of the `range` operator:
+
+s := "hêllo"
+for i, r := range s {
+    fmt.Printf("position %d: %c\n", i, r)
+}
+
+Or, we can convert the string into a slice of runes and iterate over it:
+
+s := "hêllo"
+runes := []rune(s)
+for i, r := range runes {
+    fmt.Printf("position %d: %c\n", i, r)
+}
+
+Note that this solution introduces a run-time overhead compared to the previous one. Indeed, converting a string into a slice of runes requires allocating an additional slice and converting the bytes into runes: an O(n) time complexity with n the number of bytes in the string. Therefore, if we want to iterate over all the runes, we should use the first solution.
+
+However, if we want to access the ith rune of a string with the first option, we don’t have access to the rune index; rather, we know the starting index of a rune in the byte sequence.
+
+s := "hêllo"
+r := []rune(s)[4]
+fmt.Printf("%c\n", r) // o
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/05-strings/37-string-iteration/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-38-misusing-trim-functions.md b/prompts/skills/100-go-mistakes/references/mistake-38-misusing-trim-functions.md
new file mode 100644
index 0000000..5faf065
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-38-misusing-trim-functions.md
@@ -0,0 +1,18 @@
+# Mistake #38: Misusing trim functions
+
+#### TL;DR
+TL;DR
+
+`strings.TrimRight`/`strings.TrimLeft` removes all the trailing/leading runes contained in a given set, whereas `strings.TrimSuffix`/`strings.TrimPrefix` returns a string without a provided suffix/prefix.
+
+For example:
+
+fmt.Println(strings.TrimRight("123oxo", "xo"))
+
+The example prints 123:
+
+Conversely, `strings.TrimLeft` removes all the leading runes contained in a set.
+
+On the other side, `strings.TrimSuffix` / `strings.TrimPrefix` returns a string without the provided trailing suffix / prefix.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/05-strings/38-trim/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-39-under-optimized-strings-concatenation.md b/prompts/skills/100-go-mistakes/references/mistake-39-under-optimized-strings-concatenation.md
new file mode 100644
index 0000000..5949474
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-39-under-optimized-strings-concatenation.md
@@ -0,0 +1,63 @@
+# Mistake #39: Under-optimized strings concatenation
+
+#### TL;DR
+TL;DR
+
+Concatenating a list of strings should be done with `strings.Builder` to prevent allocating a new string during each iteration.
+
+Let’s consider a `concat` function that concatenates all the string elements of a slice using the `+=` operator:
+
+func concat(values []string) string {
+    s := ""
+    for _, value := range values {
+        s += value
+    }
+    return s
+}
+
+During each iteration, the `+=` operator concatenates `s` with the value string. At first sight, this function may not look wrong. But with this implementation, we forget one of the core characteristics of a string: its immutability. Therefore, each iteration doesn’t update `s`; it reallocates a new string in memory, which significantly impacts the performance of this function.
+
+Fortunately, there is a solution to deal with this problem, using `strings.Builder`:
+
+func concat(values []string) string {
+    sb := strings.Builder{}
+    for _, value := range values {
+        _, _ = sb.WriteString(value)
+    }
+    return sb.String()
+}
+
+During each iteration, we constructed the resulting string by calling the `WriteString` method that appends the content of value to its internal buffer, hence minimizing memory copying.
+
+#### TL;DR
+Note
+
+`WriteString` returns an error as the second output, but we purposely ignore it. Indeed, this method will never return a non-nil error. So what’s the purpose of this method returning an error as part of its signature? `strings.Builder` implements the `io.StringWriter` interface, which contains a single method: `WriteString(s string) (n int, err error)`. Hence, to comply with this interface, `WriteString` must return an error.
+
+Internally, `strings.Builder` holds a byte slice. Each call to `WriteString` results in a call to append on this slice. There are two impacts. First, this struct shouldn’t be used concurrently, as the calls to `append` would lead to race conditions. The second impact is something that we saw in mistake #21, "Inefficient slice initialization": if the future length of a slice is already known, we should preallocate it. For that purpose, `strings.Builder` exposes a method `Grow(n int)` to guarantee space for another `n` bytes:
+
+func concat(values []string) string {
+    total := 0
+    for i := 0; i < len(values); i++ {
+        total += len(values[i])
+    }
+
+    sb := strings.Builder{}
+    sb.Grow(total) (2)
+    for _, value := range values {
+        _, _ = sb.WriteString(value)
+    }
+    return sb.String()
+}
+
+Let’s run a benchmark to compare the three versions (v1 using `+=`; v2 using `strings.Builder{}` without preallocation; and v3 using `strings.Builder{}` with preallocation). The input slice contains 1,000 strings, and each string contains 1,000 bytes:
+
+BenchmarkConcatV1-4             16      72291485 ns/op
+BenchmarkConcatV2-4           1188        878962 ns/op
+BenchmarkConcatV3-4           5922        190340 ns/op
+
+As we can see, the latest version is by far the most efficient: 99% faster than v1 and 78% faster than v2.
+
+`strings.Builder` is the recommended solution to concatenate a list of strings. Usually, this solution should be used within a loop. Indeed, if we just have to concatenate a few strings (such as a name and a surname), using `strings.Builder` is not recommended as doing so will make the code a bit less readable than using the `+=` operator or `fmt.Sprintf`.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/05-strings/39-string-concat/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-40-useless-string-conversions.md b/prompts/skills/100-go-mistakes/references/mistake-40-useless-string-conversions.md
new file mode 100644
index 0000000..3a46cc7
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-40-useless-string-conversions.md
@@ -0,0 +1,12 @@
+# Mistake #40: Useless string conversions
+
+#### TL;DR
+TL;DR
+
+Remembering that the `bytes` package offers the same operations as the `strings` package can help avoid extra byte/string conversions.
+
+When choosing to work with a string or a `[]byte`, most programmers tend to favor strings for convenience. But most I/O is actually done with `[]byte`. For example, `io.Reader`, `io.Writer`, and `io.ReadAll` work with `[]byte`, not strings.
+
+When we’re wondering whether we should work with strings or `[]byte`, let’s recall that working with `[]byte` isn’t necessarily less convenient. Indeed, all the exported functions of the strings package also have alternatives in the `bytes` package: `Split`, `Count`, `Contains`, `Index`, and so on. Hence, whether we’re doing I/O or not, we should first check whether we could implement a whole workflow using bytes instead of strings and avoid the price of additional conversions.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/05-strings/40-string-conversion/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-41-substring-and-memory-leaks.md b/prompts/skills/100-go-mistakes/references/mistake-41-substring-and-memory-leaks.md
new file mode 100644
index 0000000..9042bb6
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-41-substring-and-memory-leaks.md
@@ -0,0 +1,12 @@
+# Mistake #41: Substring and memory leaks
+
+#### TL;DR
+TL;DR
+
+Using copies instead of substrings can prevent memory leaks, as the string returned by a substring operation will be backed by the same byte array.
+
+In mistake #26, “Slices and memory leaks,” we saw how slicing a slice or array may lead to memory leak situations. This principle also applies to string and substring operations.
+
+We need to keep two things in mind while using the substring operation in Go. First, the interval provided is based on the number of bytes, not the number of runes. Second, a substring operation may lead to a memory leak as the resulting substring will share the same backing array as the initial string. The solutions to prevent this case from happening are to perform a string copy manually or to use `strings.Clone` from Go 1.18.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/05-strings/41-substring-memory-leak/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-42-not-knowing-which-type-of-receiver-to-use.md b/prompts/skills/100-go-mistakes/references/mistake-42-not-knowing-which-type-of-receiver-to-use.md
new file mode 100644
index 0000000..aa51515
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-42-not-knowing-which-type-of-receiver-to-use.md
@@ -0,0 +1,40 @@
+# Mistake #42: Not knowing which type of receiver to use
+
+#### TL;DR
+TL;DR
+
+The decision whether to use a value or a pointer receiver should be made based on factors such as the type, whether it has to be mutated, whether it contains a field that can’t be copied, and how large the object is. When in doubt, use a pointer receiver.
+
+Choosing between value and pointer receivers isn’t always straightforward. Let’s discuss some of the conditions to help us choose.
+
+A receiver must be a pointer
+
+* If the method needs to mutate the receiver. This rule is also valid if the receiver is a slice and a method needs to append elements:
+
+type slice []int
+
+func (s *slice) add(element int) {
+    *s = append(*s, element)
+}
+
+* If the method receiver contains a field that cannot be copied: for example, a type part of the sync package (see #74, “Copying a sync type”).
+
+A receiver should be a pointer
+
+* If the receiver is a large object. Using a pointer can make the call more efficient, as doing so prevents making an extensive copy. When in doubt about how large is large, benchmarking can be the solution; it’s pretty much impossible to state a specific size, because it depends on many factors.
+
+A receiver must be a value
+
+* If we have to enforce a receiver’s immutability.
+* If the receiver is a map, function, or channel. Otherwise, a compilation error
+  occurs.
+
+A receiver should be a value
+
+* If the receiver is a slice that doesn’t have to be mutated.
+* If the receiver is a small array or struct that is naturally a value type without mutable fields, such as `time.Time`.
+* If the receiver is a basic type such as `int`, `float64`, or `string`.
+
+Of course, it’s impossible to be exhaustive, as there will always be edge cases, but this section’s goal was to provide guidance to cover most cases. By default, we can choose to go with a value receiver unless there’s a good reason not to do so. In doubt, we should use a pointer receiver.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/06-functions-methods/42-receiver/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-43-never-using-named-result-parameters.md b/prompts/skills/100-go-mistakes/references/mistake-43-never-using-named-result-parameters.md
new file mode 100644
index 0000000..d8a9857
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-43-never-using-named-result-parameters.md
@@ -0,0 +1,21 @@
+# Mistake #43: Never using named result parameters
+
+#### TL;DR
+TL;DR
+
+Using named result parameters can be an efficient way to improve the readability of a function/method, especially if multiple result parameters have the same type. In some cases, this approach can also be convenient because named result parameters are initialized to their zero value. But be cautious about potential side effects.
+
+When we return parameters in a function or a method, we can attach names to these parameters and use them as regular variables. When a result parameter is named, it’s initialized to its zero value when the function/method begins. With named result parameters, we can also call a naked return statement (without arguments). In that case, the current values of the result parameters are used as the returned values.
+
+Here’s an example that uses a named result parameter `b`:
+
+func f(a int) (b int) {
+    b = a
+    return
+}
+
+In this example, we attach a name to the result parameter: `b`. When we call return without arguments, it returns the current value of `b`.
+
+In some cases, named result parameters can also increase readability: for example, if two parameters have the same type. In other cases, they can also be used for convenience. Therefore, we should use named result parameters sparingly when there’s a clear benefit.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/06-functions-methods/43-named-result-parameters/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-44-unintended-side-effects-with-named-result-parameters.md b/prompts/skills/100-go-mistakes/references/mistake-44-unintended-side-effects-with-named-result-parameters.md
new file mode 100644
index 0000000..9cea481
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-44-unintended-side-effects-with-named-result-parameters.md
@@ -0,0 +1,28 @@
+# Mistake #44: Unintended side effects with named result parameters
+
+#### TL;DR
+TL;DR
+
+See #43.
+
+We mentioned why named result parameters can be useful in some situations. But as these result parameters are initialized to their zero value, using them can sometimes lead to subtle bugs if we’re not careful enough. For example, can you spot what’s wrong with this code?
+
+func (l loc) getCoordinates(ctx context.Context, address string) (
+    lat, lng float32, err error) {
+    isValid := l.validateAddress(address) (1)
+    if !isValid {
+        return 0, 0, errors.New("invalid address")
+    }
+
+    if ctx.Err() != nil { (2)
+        return 0, 0, err
+    }
+
+    // Get and return coordinates
+}
+
+The error might not be obvious at first glance. Here, the error returned in the `if ctx.Err() != nil` scope is `err`. But we haven’t assigned any value to the `err` variable. It’s still assigned to the zero value of an `error` type: `nil`. Hence, this code will always return a nil error.
+
+When using named result parameters, we must recall that each parameter is initialized to its zero value. As we have seen in this section, this can lead to subtle bugs that aren’t always straightforward to spot while reading code. Therefore, let’s remain cautious when using named result parameters, to avoid potential side effects.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/06-functions-methods/44-side-effects-named-result-parameters/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-45-returning-a-nil-receiver.md b/prompts/skills/100-go-mistakes/references/mistake-45-returning-a-nil-receiver.md
new file mode 100644
index 0000000..d0463ff
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-45-returning-a-nil-receiver.md
@@ -0,0 +1,8 @@
+# Mistake #45: Returning a nil receiver
+
+#### TL;DR
+TL;DR
+
+When returning an interface, be cautious about not returning a nil pointer but an explicit nil value. Otherwise, unintended consequences may occur and the caller will receive a non-nil value.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/06-functions-methods/45-nil-receiver/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-46-using-a-filename-as-a-function-input.md b/prompts/skills/100-go-mistakes/references/mistake-46-using-a-filename-as-a-function-input.md
new file mode 100644
index 0000000..d26e4b8
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-46-using-a-filename-as-a-function-input.md
@@ -0,0 +1,10 @@
+# Mistake #46: Using a filename as a function input
+
+#### TL;DR
+TL;DR
+
+Designing functions to receive `io.Reader` types instead of filenames improves the reusability of a function and makes testing easier.
+
+Accepting a filename as a function input to read from a file should, in most cases, be considered a code smell (except in specific functions such as `os.Open`). Indeed, it makes unit tests more complex because we may have to create multiple files. It also reduces the reusability of a function (although not all functions are meant to be reused). Using the `io.Reader` interface abstracts the data source. Regardless of whether the input is a file, a string, an HTTP request, or a gRPC request, the implementation can be reused and easily tested.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/06-functions-methods/46-function-input/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-47-ignoring-how-defer-arguments-and-receivers-are-evaluated.md b/prompts/skills/100-go-mistakes/references/mistake-47-ignoring-how-defer-arguments-and-receivers-are-evaluated.md
new file mode 100644
index 0000000..167877f
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-47-ignoring-how-defer-arguments-and-receivers-are-evaluated.md
@@ -0,0 +1,3 @@
+# Mistake #47: Ignoring how defer arguments and receivers are evaluated
+
+[Documentation for mistake #47 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-48-panicking.md b/prompts/skills/100-go-mistakes/references/mistake-48-panicking.md
new file mode 100644
index 0000000..e2e650d
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-48-panicking.md
@@ -0,0 +1,27 @@
+# Mistake #48: Panicking
+
+#### TL;DR
+TL;DR
+
+Using `panic` is an option to deal with errors in Go. However, it should only be used sparingly in unrecoverable conditions: for example, to signal a programmer error or when you fail to load a mandatory dependency.
+
+In Go, panic is a built-in function that stops the ordinary flow:
+
+func main() {
+    fmt.Println("a")
+    panic("foo")
+    fmt.Println("b")
+}
+
+This code prints a and then stops before printing b:
+
+a
+panic: foo
+
+goroutine 1 [running]:
+main.main()
+        main.go:7 +0xb3
+
+Panicking in Go should be used sparingly. There are two prominent cases, one to signal a programmer error (e.g., `sql.Register` that panics if the driver is `nil` or has already been register) and another where our application fails to create a mandatory dependency. Hence, exceptional conditions that lead us to stop the application. In most other cases, error management should be done with a function that returns a proper error type as the last return argument.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/07-error-management/48-panic/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-49-ignoring-when-to-wrap-an-error.md b/prompts/skills/100-go-mistakes/references/mistake-49-ignoring-when-to-wrap-an-error.md
new file mode 100644
index 0000000..5284e0b
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-49-ignoring-when-to-wrap-an-error.md
@@ -0,0 +1,15 @@
+# Mistake #49: Ignoring when to wrap an error
+
+#### TL;DR
+TL;DR
+
+Wrapping an error allows you to mark an error and/or provide additional context. However, error wrapping creates potential coupling as it makes the source error available for the caller. If you want to prevent that, don’t use error wrapping.
+
+Since Go 1.13, the %w directive allows us to wrap errors conveniently. Error wrapping is about wrapping or packing an error inside a wrapper container that also makes the source error available. In general, the two main use cases for error wrapping are the following:
+
+* Adding additional context to an error
+* Marking an error as a specific error
+
+When handling an error, we can decide to wrap it. Wrapping is about adding additional context to an error and/or marking an error as a specific type. If we need to mark an error, we should create a custom error type. However, if we just want to add extra context, we should use fmt.Errorf with the %w directive as it doesn’t require creating a new error type. Yet, error wrapping creates potential coupling as it makes the source error available for the caller. If we want to prevent it, we shouldn’t use error wrapping but error transformation, for example, using fmt.Errorf with the %v directive.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/07-error-management/49-error-wrapping/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-50-comparing-an-error-type-inaccurately.md b/prompts/skills/100-go-mistakes/references/mistake-50-comparing-an-error-type-inaccurately.md
new file mode 100644
index 0000000..9d9a78d
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-50-comparing-an-error-type-inaccurately.md
@@ -0,0 +1,8 @@
+# Mistake #50: Comparing an error type inaccurately
+
+#### TL;DR
+TL;DR
+
+If you use Go 1.13 error wrapping with the `%w` directive and `fmt.Errorf`, comparing an error against a type has to be done using `errors.As`. Otherwise, if the returned error you want to check is wrapped, it will fail the checks.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/07-error-management/50-compare-error-type/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-51-comparing-an-error-value-inaccurately.md b/prompts/skills/100-go-mistakes/references/mistake-51-comparing-an-error-value-inaccurately.md
new file mode 100644
index 0000000..23dce0e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-51-comparing-an-error-value-inaccurately.md
@@ -0,0 +1,21 @@
+# Mistake #51: Comparing an error value inaccurately
+
+#### TL;DR
+TL;DR
+
+If you use Go 1.13 error wrapping with the `%w` directive and `fmt.Errorf`, comparing an error against or a value has to be done using `errors.As`. Otherwise, if the returned error you want to check is wrapped, it will fail the checks.
+
+A sentinel error is an error defined as a global variable:
+
+import "errors"
+
+var ErrFoo = errors.New("foo")
+
+In general, the convention is to start with `Err` followed by the error type: here, `ErrFoo`. A sentinel error conveys an expected error, an error that clients will expect to check. As general guidelines:
+
+* Expected errors should be designed as error values (sentinel errors): `var ErrFoo = errors.New("foo")`.
+* Unexpected errors should be designed as error types: `type BarError struct { ... }`, with `BarError` implementing the `error` interface.
+
+If we use error wrapping in our application with the `%w` directive and `fmt.Errorf`, checking an error against a specific value should be done using `errors.Is` instead of `==`. Thus, even if the sentinel error is wrapped, `errors.Is` can recursively unwrap it and compare each error in the chain against the provided value.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/07-error-management/51-comparing-error-value/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-52-handling-an-error-twice.md b/prompts/skills/100-go-mistakes/references/mistake-52-handling-an-error-twice.md
new file mode 100644
index 0000000..812d3f0
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-52-handling-an-error-twice.md
@@ -0,0 +1,12 @@
+# Mistake #52: Handling an error twice
+
+#### TL;DR
+TL;DR
+
+In most situations, an error should be handled only once. Logging an error is handling an error. Therefore, you have to choose between logging or returning an error. In many cases, error wrapping is the solution as it allows you to provide additional context to an error and return the source error.
+
+Handling an error multiple times is a mistake made frequently by developers, not specifically in Go. This can cause situations where the same error is logged multiple times make debugging harder.
+
+Let's remind us that handling an error should be done only once. Logging an error is handling an error. Hence, we should either log or return an error. By doing this, we simplify our code and gain better insights into the error situation. Using error wrapping is the most convenient approach as it allows us to propagate the source error and add context to an error.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/07-error-management/52-handling-error-twice/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-53-not-handling-an-error.md b/prompts/skills/100-go-mistakes/references/mistake-53-not-handling-an-error.md
new file mode 100644
index 0000000..fe98f60
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-53-not-handling-an-error.md
@@ -0,0 +1,8 @@
+# Mistake #53: Not handling an error
+
+#### TL;DR
+TL;DR
+
+Ignoring an error, whether during a function call or in a `defer` function, should be done explicitly using the blank identifier. Otherwise, future readers may be confused about whether it was intentional or a miss.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/07-error-management/53-not-handling-error/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-54-not-handling-defer-errors.md b/prompts/skills/100-go-mistakes/references/mistake-54-not-handling-defer-errors.md
new file mode 100644
index 0000000..80dc62a
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-54-not-handling-defer-errors.md
@@ -0,0 +1,3 @@
+# Mistake #54: Not handling defer errors
+
+[Documentation for mistake #54 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-55-mixing-up-concurrency-and-parallelism.md b/prompts/skills/100-go-mistakes/references/mistake-55-mixing-up-concurrency-and-parallelism.md
new file mode 100644
index 0000000..a63149b
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-55-mixing-up-concurrency-and-parallelism.md
@@ -0,0 +1,13 @@
+# Mistake #55: Mixing up concurrency and parallelism
+
+#### TL;DR
+TL;DR
+
+Understanding the fundamental differences between concurrency and parallelism is a cornerstone of the Go developer’s knowledge. Concurrency is about structure, whereas parallelism is about execution.
+
+Concurrency and parallelism are not the same:
+
+* Concurrency is about structure. We can change a sequential implementation into a concurrent one by introducing different steps that separate concurrent goroutines can tackle.
+* Meanwhile, parallelism is about execution. We can use parallism at the steps level by adding more parallel goroutines.
+
+In summary, concurrency provides a structure to solve a problem with parts that may be parallelized. Therefore, concurrency enables parallelism.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-56-thinking-concurrency-is-always-faster.md b/prompts/skills/100-go-mistakes/references/mistake-56-thinking-concurrency-is-always-faster.md
new file mode 100644
index 0000000..203520f
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-56-thinking-concurrency-is-always-faster.md
@@ -0,0 +1,10 @@
+# Mistake #56: Thinking concurrency is always faster
+
+#### TL;DR
+TL;DR
+
+To be a proficient developer, you must acknowledge that concurrency isn’t always faster. Solutions involving parallelization of minimal workloads may not necessarily be faster than a sequential implementation. Benchmarking sequential versus concurrent solutions should be the way to validate assumptions.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/08-concurrency-foundations/56-faster/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-57-being-puzzled-about-when-to-use-channels-or-mutexes.md b/prompts/skills/100-go-mistakes/references/mistake-57-being-puzzled-about-when-to-use-channels-or-mutexes.md
new file mode 100644
index 0000000..7bc9e23
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-57-being-puzzled-about-when-to-use-channels-or-mutexes.md
@@ -0,0 +1,23 @@
+# Mistake #57: Being puzzled about when to use channels or mutexes
+
+#### TL;DR
+TL;DR
+
+Being aware of goroutine interactions can also be helpful when deciding between channels and mutexes. In general, parallel goroutines require synchronization and hence mutexes. Conversely, concurrent goroutines generally require coordination and orchestration and hence channels.
+
+Given a concurrency problem, it may not always be clear whether we can implement a
+solution using channels or mutexes. Because Go promotes sharing memory by communication, one mistake could be to always force the use of channels, regardless of
+the use case. However, we should see the two options as complementary. 
+
+When should we use channels or mutexes? We will use the example in the next figure as a backbone. Our example has three different goroutines with specific relationships:
+
+* G1 and G2 are parallel goroutines. They may be two goroutines executing the same function that keeps receiving messages from a channel, or perhaps two goroutines executing the same HTTP handler at the same time.
+* On the other hand, G1 and G3 are concurrent goroutines, as are G2 and G3. All the goroutines are part of an overall concurrent structure, but G1 and G2 perform the first step, whereas G3 does the next step.
+
+In general, parallel goroutines have to synchronize: for example, when they need to access or mutate a shared resource such as a slice. Synchronization is enforced with mutexes but not with any channel types (not with buffered channels). Hence, in general, synchronization between parallel goroutines should be achieved via mutexes.
+
+Conversely, in general, concurrent goroutines have to coordinate and orchestrate. For example, if G3 needs to aggregate results from both G1 and G2, G1 and G2 need to signal to G3 that a new intermediate result is available. This coordination falls under the scope of communication—therefore, channels.
+
+Regarding concurrent goroutines, there’s also the case where we want to transfer the ownership of a resource from one step (G1 and G2) to another (G3); for example, if G1 and G2 are enriching a shared resource and at some point, we consider this job as complete. Here, we should use channels to signal that a specific resource is ready and handle the ownership transfer.
+
+Mutexes and channels have different semantics. Whenever we want to share a state or access a shared resource, mutexes ensure exclusive access to this resource. Conversely, channels are a mechanic for signaling with or without data (`chan struct{}` or not). Coordination or ownership transfer should be achieved via channels. It’s important to know whether goroutines are parallel or concurrent because, in general, we need mutexes for parallel goroutines and channels for concurrent ones.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-58-not-understanding-race-problems-data-races-vs-race-conditions.md b/prompts/skills/100-go-mistakes/references/mistake-58-not-understanding-race-problems-data-races-vs-race-conditions.md
new file mode 100644
index 0000000..00d536d
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-58-not-understanding-race-problems-data-races-vs-race-conditions.md
@@ -0,0 +1,28 @@
+# Mistake #58: Not understanding race problems (data races vs. race conditions and the Go memory model)
+
+#### TL;DR
+TL;DR
+
+Being proficient in concurrency also means understanding that data races and race conditions are different concepts. Data races occur when multiple goroutines simultaneously access the same memory location and at least one of them is writing. Meanwhile, being data-race-free doesn’t necessarily mean deterministic execution. When a behavior depends on the sequence or the timing of events that can’t be controlled, this is a race condition.
+
+Race problems can be among the hardest and most insidious bugs a programmer can face. As Go developers, we must understand crucial aspects such as data races and race conditions, their possible impacts, and how to avoid them.
+
+Data Race
+
+A data race occurs when two or more goroutines simultaneously access the same memory location and at least one is writing. In this case, the result can be hazardous. Even worse, in some situations, the memory location may end up holding a value containing a meaningless combination of bits.
+
+We can prevent a data race from happening using different techniques. For example: 
+
+* Using the `sync/atomic` package
+* In synchronizing the two goroutines with an ad hoc data structure like a mutex
+* Using channels to make the two goroutines communicating to ensure that a variable is updated by only one goroutine at a time
+
+Race Condition
+
+Depending on the operation we want to perform, does a data-race-free application necessarily mean a deterministic result? Not necessarily.
+
+A race condition occurs when the behavior depends on the sequence or the timing of events that can’t be controlled. Here, the timing of events is the goroutines’ execution order.
+
+In summary, when we work in concurrent applications, it’s essential to understand that a data race is different from a race condition. A data race occurs when multiple goroutines simultaneously access the same memory location and at least one of them is writing. A data race means unexpected behavior. However, a data-race-free application doesn’t necessarily mean deterministic results. An application can be free of data races but still have behavior that depends on uncontrolled events (such as goroutine execution, how fast a message is published to a channel, or how long a call to a database lasts); this is a race condition. Understanding both concepts is crucial to becoming proficient in designing concurrent applications.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/08-concurrency-foundations/58-races/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-59-not-understanding-the-concurrency-impacts-of-a-workload-type.md b/prompts/skills/100-go-mistakes/references/mistake-59-not-understanding-the-concurrency-impacts-of-a-workload-type.md
new file mode 100644
index 0000000..a3476be
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-59-not-understanding-the-concurrency-impacts-of-a-workload-type.md
@@ -0,0 +1,21 @@
+# Mistake #59: Not understanding the concurrency impacts of a workload type
+
+#### TL;DR
+TL;DR
+
+When creating a certain number of goroutines, consider the workload type. Creating CPU-bound goroutines means bounding this number close to the GOMAXPROCS variable (based by default on the number of CPU cores on the host). Creating I/O-bound goroutines depends on other factors, such as the external system.
+
+In programming, the execution time of a workload is limited by one of the following:
+
+* The speed of the CPU—For example, running a merge sort algorithm. The workload is called CPU-bound.
+* The speed of I/O—For example, making a REST call or a database query. The workload is called I/O-bound.
+* The amount of available memory—The workload is called memory-bound.
+
+#### TL;DR
+Note
+
+The last is the rarest nowadays, given that memory has become very cheap in recent decades. Hence, this section focuses on the two first workload types: CPU- and I/O-bound.
+
+If the workload executed by the workers is I/O-bound, the value mainly depends on the external system. Conversely, if the workload is CPU-bound, the optimal number of goroutines is close to the number of available CPU cores (a best practice can be to use `runtime.GOMAXPROCS`). Knowing the workload type (I/O or CPU) is crucial when designing concurrent applications.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/08-concurrency-foundations/59-workload-type/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-60-misunderstanding-go-contexts.md b/prompts/skills/100-go-mistakes/references/mistake-60-misunderstanding-go-contexts.md
new file mode 100644
index 0000000..71be7c5
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-60-misunderstanding-go-contexts.md
@@ -0,0 +1,42 @@
+# Mistake #60: Misunderstanding Go contexts
+
+#### TL;DR
+TL;DR
+
+Go contexts are also one of the cornerstones of concurrency in Go. A context allows you to carry a deadline, a cancellation signal, and/or a list of keys-values.
+
+https://pkg.go.dev/context
+
+A Context carries a deadline, a cancellation signal, and other values across API boundaries.
+
+Deadline
+
+A deadline refers to a specific point in time determined with one of the following:
+
+* A `time.Duration` from now (for example, in 250 ms)
+* A `time.Time` (for example, 2023-02-07 00:00:00 UTC)
+
+The semantics of a deadline convey that an ongoing activity should be stopped if this deadline is met. An activity is, for example, an I/O request or a goroutine waiting to receive a message from a channel.
+
+Cancellation signals
+
+Another use case for Go contexts is to carry a cancellation signal. Let’s imagine that we want to create an application that calls `CreateFileWatcher(ctx context.Context, filename string)` within another goroutine. This function creates a specific file watcher that keeps reading from a file and catches updates. When the provided context expires or is canceled, this function handles it to close the file descriptor.
+
+Context values
+
+The last use case for Go contexts is to carry a key-value list. What’s the point of having a context carrying a key-value list? Because Go contexts are generic and mainstream, there are infinite use cases.
+
+For example, if we use tracing, we may want different subfunctions to share the same correlation ID. Some developers may consider this ID too invasive to be part of the function signature. In this regard, we could also decide to include it as part of the provided context.
+
+Catching a context cancellation
+
+The `context.Context` type exports a `Done` method that returns a receive-only notification channel: `<-chan struct{}`. This channel is closed when the work associated with the context should be canceled. For example,
+
+* The Done channel related to a context created with `context.WithCancel` is closed when the cancel function is called.
+* The Done channel related to a context created with `context.WithDeadline` is closed when the deadline has expired.
+
+One thing to note is that the internal channel should be closed when a context is canceled or has met a deadline, instead of when it receives a specific value, because the closure of a channel is the only channel action that all the consumer goroutines will receive. This way, all the consumers will be notified once a context is canceled or a deadline is reached.
+
+In summary, to be a proficient Go developer, we have to understand what a context is and how to use it. In general, a function that users wait for should take a context, as doing so allows upstream callers to decide when calling this function should be aborted. 
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/08-concurrency-foundations/60-contexts/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-61-propagating-an-inappropriate-context.md b/prompts/skills/100-go-mistakes/references/mistake-61-propagating-an-inappropriate-context.md
new file mode 100644
index 0000000..a0f3e5a
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-61-propagating-an-inappropriate-context.md
@@ -0,0 +1,47 @@
+# Mistake #61: Propagating an inappropriate context
+
+#### TL;DR
+TL;DR
+
+Understanding the conditions when a context can be canceled should matter when propagating it: for example, an HTTP handler canceling the context when the response has been sent.
+
+In many situations, it is recommended to propagate Go contexts. However, context propagation can sometimes lead to subtle bugs, preventing subfunctions from being correctly executed.
+
+Let’s consider the following example. We expose an HTTP handler that performs some tasks and returns a response. But just before returning the response, we also want to send it to a Kafka topic. We don’t want to penalize the HTTP consumer latency-wise, so we want the publish action to be handled asynchronously within a new goroutine. We assume that we have at our disposal a `publish` function that accepts a context so the action of publishing a message can be interrupted if the context is canceled, for example. Here is a possible implementation:
+
+func handler(w http.ResponseWriter, r *http.Request) {
+    response, err := doSomeTask(r.Context(), r)
+    if err != nil {
+        http.Error(w, err.Error(), http.StatusInternalServerError)
+    return
+    }
+    go func() {
+        err := publish(r.Context(), response)
+        // Do something with err
+    }()
+    writeResponse(response)
+}
+
+What’s wrong with this piece of code? We have to know that the context attached to an HTTP request can cancel in different conditions:
+
+* When the client’s connection closes
+* In the case of an HTTP/2 request, when the request is canceled
+* When the response has been written back to the client
+
+In the first two cases, we probably handle things correctly. For example, if we get a response from doSomeTask but the client has closed the connection, it’s probably OK to call publish with a context already canceled so the message isn’t published. But what about the last case?
+
+When the response has been written to the client, the context associated with the request will be canceled. Therefore, we are facing a race condition:
+
+* If the response is written after the Kafka publication, we both return a response and publish a message successfully
+* However, if the response is written before or during the Kafka publication, the message shouldn’t be published.
+
+In the latter case, calling publish will return an error because we returned the HTTP response quickly.
+
+#### TL;DR
+Note
+
+From Go 1.21, there is a way to create a new context without cancel. `context.WithoutCancel` returns a copy of parent that is not canceled when parent is canceled.
+
+In summary, propagating a context should be done cautiously.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/61-inappropriate-context/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-62-starting-a-goroutine-without-knowing-when-to-stop-it.md b/prompts/skills/100-go-mistakes/references/mistake-62-starting-a-goroutine-without-knowing-when-to-stop-it.md
new file mode 100644
index 0000000..b9dcbf4
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-62-starting-a-goroutine-without-knowing-when-to-stop-it.md
@@ -0,0 +1,64 @@
+# Mistake #62: Starting a goroutine without knowing when to stop it
+
+#### TL;DR
+TL;DR
+
+Avoiding leaks means being mindful that whenever a goroutine is started, you should have a plan to stop it eventually.
+
+Goroutines are easy and cheap to start—so easy and cheap that we may not necessarily have a plan for when to stop a new goroutine, which can lead to leaks. Not knowing when to stop a goroutine is a design issue and a common concurrency mistake in Go.
+
+Let’s discuss a concrete example. We will design an application that needs to watch some external configuration (for example, using a database connection). Here’s a first implementation:
+
+func main() {
+    newWatcher()
+    // Run the application
+}
+
+type watcher struct { /* Some resources */ }
+
+func newWatcher() {
+    w := watcher{}
+    go w.watch() // Creates a goroutine that watches some external configuration
+}
+
+The problem with this code is that when the main goroutine exits (perhaps because of an OS signal or because it has a finite workload), the application is stopped. Hence, the resources created by watcher aren’t closed gracefully. How can we prevent this from happening?
+
+One option could be to pass to newWatcher a context that will be canceled when main returns:
+
+func main() {
+    ctx, cancel := context.WithCancel(context.Background())
+    defer cancel()
+    newWatcher(ctx)
+    // Run the application
+}
+
+func newWatcher(ctx context.Context) {
+    w := watcher{}
+    go w.watch(ctx)
+}
+
+We propagate the context created to the watch method. When the context is canceled, the watcher struct should close its resources. However, can we guarantee that watch will have time to do so? Absolutely not—and that’s a design flaw.
+
+The problem is that we used signaling to convey that a goroutine had to be stopped. We didn’t block the parent goroutine until the resources had been closed.  Let’s make sure we do:
+
+func main() {
+    w := newWatcher()
+    defer w.close()
+    // Run the application
+}
+
+func newWatcher() watcher {
+    w := watcher{}
+    go w.watch()
+    return w
+}
+
+func (w watcher) close() {
+    // Close the resources
+}
+
+Instead of signaling `watcher` that it’s time to close its resources, we now call this `close` method, using `defer` to guarantee that the resources are closed before the application exits.
+
+In summary, let’s be mindful that a goroutine is a resource like any other that must eventually be closed to free memory or other resources. Starting a goroutine without knowing when to stop it is a design issue. Whenever a goroutine is started, we should have a clear plan about when it will stop. Last but not least, if a goroutine creates resources and its lifetime is bound to the lifetime of the application, it’s probably safer to wait for this goroutine to complete before exiting the application. This way, we can ensure that the resources can be freed.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/62-starting-goroutine/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-63-not-being-careful-with-goroutines-and-loop-variables.md b/prompts/skills/100-go-mistakes/references/mistake-63-not-being-careful-with-goroutines-and-loop-variables.md
new file mode 100644
index 0000000..47cc181
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-63-not-being-careful-with-goroutines-and-loop-variables.md
@@ -0,0 +1,3 @@
+# Mistake #63: Not being careful with goroutines and loop variables
+
+[Documentation for mistake #63 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-64-expecting-a-deterministic-behavior-using-select-and-channels.md b/prompts/skills/100-go-mistakes/references/mistake-64-expecting-a-deterministic-behavior-using-select-and-channels.md
new file mode 100644
index 0000000..a9a3781
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-64-expecting-a-deterministic-behavior-using-select-and-channels.md
@@ -0,0 +1,51 @@
+# Mistake #64: Expecting a deterministic behavior using select and channels
+
+#### TL;DR
+TL;DR
+
+Understanding that `select` with multiple channels chooses the case randomly if multiple options are possible prevents making wrong assumptions that can lead to subtle concurrency bugs.
+
+One common mistake made by Go developers while working with channels is to make wrong assumptions about how select behaves with multiple channels.
+
+For example, let's consider the following case (`disconnectCh` is a unbuffered channel):
+
+go func() {
+  for i := 0; i < 10; i++ {
+      messageCh <- i
+    }
+    disconnectCh <- struct{}{}
+}()
+
+for {
+    select {
+    case v := <-messageCh:
+        fmt.Println(v)
+    case <-disconnectCh:
+        fmt.Println("disconnection, return")
+        return
+    }
+}
+
+If we run this example multiple times, the result will be random:
+
+0
+1
+2
+disconnection, return
+
+0
+disconnection, return
+
+Instead of consuming the 10 messages, we only received a few of them. What’s the reason? It lies in the specification of the select statement with multiple channels (https:// go.dev/ref/spec):
+
+Quote
+
+If one or more of the communications can proceed, a single one that can proceed is chosen via a uniform pseudo-random selection.
+
+Unlike a switch statement, where the first case with a match wins, the select statement selects randomly if multiple options are possible.
+
+This behavior might look odd at first, but there’s a good reason for it: to prevent possible starvation. Suppose the first possible communication chosen is based on the source order. In that case, we may fall into a situation where, for example, we only receive from one channel because of a fast sender. To prevent this, the language designers decided to use a random selection.
+
+When using `select` with multiple channels, we must remember that if multiple options are possible, the first case in the source order does not automatically win. Instead, Go selects randomly, so there’s no guarantee about which option will be chosen. To overcome this behavior, in the case of a single producer goroutine, we can use either unbuffered channels or a single channel.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/64-select-behavior/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-65-not-using-notification-channels.md b/prompts/skills/100-go-mistakes/references/mistake-65-not-using-notification-channels.md
new file mode 100644
index 0000000..78d748f
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-65-not-using-notification-channels.md
@@ -0,0 +1,16 @@
+# Mistake #65: Not using notification channels
+
+#### TL;DR
+TL;DR
+
+Send notifications using a `chan struct{}` type.
+
+Channels are a mechanism for communicating across goroutines via signaling. A signal can be either with or without data.
+
+Let’s look at a concrete example. We will create a channel that will notify us whenever a certain disconnection occurs. One idea is to handle it as a `chan bool`:
+
+disconnectCh := make(chan bool)
+
+Now, let’s say we interact with an API that provides us with such a channel. Because it’s a channel of Booleans, we can receive either `true` or `false` messages. It’s probably clear what `true` conveys. But what does `false` mean? Does it mean we haven’t been disconnected? And in this case, how frequently will we receive such a signal? Does it mean we have reconnected? Should we even expect to receive `false`? Perhaps we should only expect to receive `true` messages.
+
+If that’s the case, meaning we don’t need a specific value to convey some information, we need a channel without data. The idiomatic way to handle it is a channel of empty structs: `chan struct{}`.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-66-not-using-nil-channels.md b/prompts/skills/100-go-mistakes/references/mistake-66-not-using-nil-channels.md
new file mode 100644
index 0000000..08ea379
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-66-not-using-nil-channels.md
@@ -0,0 +1,52 @@
+# Mistake #66: Not using nil channels
+
+#### TL;DR
+TL;DR
+
+Using nil channels should be part of your concurrency toolset because it allows you to remove cases from `select` statements, for example.
+
+What should this code do?
+
+var ch chan int
+<-ch
+
+`ch` is a `chan int` type. The zero value of a channel being nil, `ch` is `nil`. The goroutine won’t panic; however, it will block forever.
+
+The principle is the same if we send a message to a nil channel. This goroutine blocks forever:
+
+var ch chan int
+ch <- 0
+
+Then what’s the purpose of Go allowing messages to be received from or sent to a nil channel? For example, we can use nil channels to implement an idiomatic way to merge two channels:
+
+func merge(ch1, ch2 <-chan int) <-chan int {
+    ch := make(chan int, 1)
+
+    go func() {
+        for ch1 != nil || ch2 != nil { // Continue if at least one channel isn’t nil
+            select {
+            case v, open := <-ch1:
+                if !open {
+                    ch1 = nil // Assign ch1 to a nil channel once closed
+                    break
+                }
+                ch <- v
+            case v, open := <-ch2:
+                if !open {
+                    ch2 = nil // Assigns ch2 to a nil channel once closed
+                    break
+                }
+                ch <- v
+            }
+        }
+        close(ch)
+    }()
+
+    return ch
+}
+
+This elegant solution relies on nil channels to somehow remove one case from the `select` statement.
+
+Let’s keep this idea in mind: nil channels are useful in some conditions and should be part of the Go developer’s toolset when dealing with concurrent code.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/66-nil-channels/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-67-being-puzzled-about-channel-size.md b/prompts/skills/100-go-mistakes/references/mistake-67-being-puzzled-about-channel-size.md
new file mode 100644
index 0000000..86ed2d3
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-67-being-puzzled-about-channel-size.md
@@ -0,0 +1,43 @@
+# Mistake #67: Being puzzled about channel size
+
+#### TL;DR
+TL;DR
+
+Carefully decide on the right channel type to use, given a problem. Only unbuffered channels provide strong synchronization guarantees. For buffered channels, you should have a good reason to specify a channel size other than one.
+
+An unbuffered channel is a channel without any capacity. It can be created by either omitting the size or providing a 0 size:
+
+ch1 := make(chan int)
+ch2 := make(chan int, 0)
+
+With an unbuffered channel (sometimes called a synchronous channel), the sender will block until the receiver receives data from the channel.
+
+Conversely, a buffered channel has a capacity, and it must be created with a size greater than or equal to 1:
+
+ch3 := make(chan int, 1)
+
+With a buffered channel, a sender can send messages while the channel isn’t full. Once the channel is full, it will block until a receiver goroutine receives a message:
+
+ch3 := make(chan int, 1)
+ch3 <-1 // Non-blocking
+ch3 <-2 // Blocking
+
+The first send isn’t blocking, whereas the second one is, as the channel is full at this stage.
+
+What's the main difference between unbuffered and buffered channels:
+
+* An unbuffered channel enables synchronization. We have the guarantee that two goroutines will be in a known state: one receiving and another sending a message.
+* A buffered channel doesn’t provide any strong synchronization. Indeed, a producer goroutine can send a message and then continue its execution if the channel isn’t full. The only guarantee is that a goroutine won’t receive a message before it is sent. But this is only a guarantee because of causality (you don’t drink your coffee before you prepare it).
+
+If we need a buffered channel, what size should we provide?
+
+The default value we should use for buffered channels is its minimum: 1. So, we may approach the problem from this standpoint: is there any good reason not to use a value of 1? Here’s a list of possible cases where we should use another size:
+
+* While using a worker pooling-like pattern, meaning spinning a fixed number of goroutines that need to send data to a shared channel. In that case, we can tie the channel size to the number of goroutines created.
+* When using channels for rate-limiting problems. For example, if we need to enforce resource utilization by bounding the number of requests, we should set up the channel size according to the limit.
+
+If we are outside of these cases, using a different channel size should be done cautiously. Let’s bear in mind that deciding about an accurate queue size isn’t an easy problem:
+
+Martin Thompson
+
+Queues are typically always close to full or close to empty due to the differences in pace between consumers and producers. They very rarely operate in a balanced middle ground where the rate of production and consumption is evenly matched.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-68-forgetting-about-possible-side-effects-with-string-formatting.md b/prompts/skills/100-go-mistakes/references/mistake-68-forgetting-about-possible-side-effects-with-string-formatting.md
new file mode 100644
index 0000000..7612443
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-68-forgetting-about-possible-side-effects-with-string-formatting.md
@@ -0,0 +1,76 @@
+# Mistake #68: Forgetting about possible side effects with string formatting
+
+#### TL;DR
+TL;DR
+
+Being aware that string formatting may lead to calling existing functions means watching out for possible deadlocks and other data races.
+
+It’s pretty easy to forget the potential side effects of string formatting while working in a concurrent application.
+
+etcd data race
+
+github.com/etcd-io/etcd/pull/7816 shows an example of an issue where a map's key was formatted based on a mutable values from a context.
+
+Deadlock
+
+Can you see what the problem is in this code with a `Customer` struct exposing an `UpdateAge` method and implementing the `fmt.Stringer` interface?
+
+type Customer struct {
+    mutex sync.RWMutex // Uses a sync.RWMutex to protect concurrent accesses
+    id    string
+    age   int
+}
+
+func (c *Customer) UpdateAge(age int) error {
+    c.mutex.Lock() // Locks and defers unlock as we update Customer
+    defer c.mutex.Unlock()
+
+    if age < 0 { // Returns an error if age is negative
+        return fmt.Errorf("age should be positive for customer %v", c)
+    }
+
+    c.age = age
+    return nil
+}
+
+func (c *Customer) String() string {
+    c.mutex.RLock() // Locks and defers unlock as we read Customer
+    defer c.mutex.RUnlock()
+    return fmt.Sprintf("id %s, age %d", c.id, c.age)
+}
+
+The problem here may not be straightforward. If the provided age is negative, we return an error. Because the error is formatted, using the `%s` directive on the receiver, it will call the `String` method to format `Customer`. But because `UpdateAge` already acquires the mutex lock, the `String` method won’t be able to acquire it. Hence, this leads to a deadlock situation. If all goroutines are also asleep, it leads to a panic.
+
+One possible solution is to restrict the scope of the mutex lock:
+
+func (c *Customer) UpdateAge(age int) error {
+    if age < 0 {
+        return fmt.Errorf("age should be positive for customer %v", c)
+    }
+
+    c.mutex.Lock()
+    defer c.mutex.Unlock()
+
+    c.age = age
+    return nil
+}
+
+Yet, such an approach isn't always possible. In these conditions, we have to be extremely careful with string formatting.
+
+Another approach is to access the `id` field directly:
+
+func (c *Customer) UpdateAge(age int) error {
+    c.mutex.Lock()
+    defer c.mutex.Unlock()
+
+    if age < 0 {
+        return fmt.Errorf("age should be positive for customer id %s", c.id)
+    }
+
+    c.age = age
+    return nil
+}
+
+In concurrent applications, we should remain cautious about the possible side effects of string formatting.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/68-string-formatting/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-69-creating-data-races-with-append.md b/prompts/skills/100-go-mistakes/references/mistake-69-creating-data-races-with-append.md
new file mode 100644
index 0000000..3888d2a
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-69-creating-data-races-with-append.md
@@ -0,0 +1,48 @@
+# Mistake #69: Creating data races with append
+
+#### TL;DR
+TL;DR
+
+Calling `append` isn’t always data-race-free; hence, it shouldn’t be used concurrently on a shared slice.
+
+Should adding an element to a slice using `append` is data-race-free? Spoiler: it depends.
+
+Do you believe this example has a data race? 
+
+s := make([]int, 1)
+
+go func() { // In a new goroutine, appends a new element on s
+    s1 := append(s, 1)
+    fmt.Println(s1)
+}()
+
+go func() { // Same
+    s2 := append(s, 1)
+    fmt.Println(s2)
+}()
+
+The answer is no.
+
+In this example, we create a slice with `make([]int, 1)`. The code creates a one-length, one-capacity slice. Thus, because the slice is full, using append in each goroutine returns a slice backed by a new array. It doesn’t mutate the existing array; hence, it doesn’t lead to a data race.
+
+Now, let’s run the same example with a slight change in how we initialize `s`. Instead of creating a slice with a length of 1, we create it with a length of 0 but a capacity of 1. How about this new example? Does it contain a data race?
+
+s := make([]int, 0, 1)
+
+go func() { 
+    s1 := append(s, 1)
+    fmt.Println(s1)
+}()
+
+go func() {
+    s2 := append(s, 1)
+    fmt.Println(s2)
+}()
+
+The answer is yes. We create a slice with `make([]int, 0, 1)`. Therefore, the array isn’t full. Both goroutines attempt to update the same index of the backing array (index 1), which is a data race.
+
+How can we prevent the data race if we want both goroutines to work on a slice containing the initial elements of `s` plus an extra element? One solution is to create a copy of `s`.
+
+We should remember that using append on a shared slice in concurrent applications can lead to a data race. Hence, it should be avoided.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/69-data-race-append/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-70-using-mutexes-inaccurately-with-slices-and-maps.md b/prompts/skills/100-go-mistakes/references/mistake-70-using-mutexes-inaccurately-with-slices-and-maps.md
new file mode 100644
index 0000000..47b9f69
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-70-using-mutexes-inaccurately-with-slices-and-maps.md
@@ -0,0 +1,74 @@
+# Mistake #70: Using mutexes inaccurately with slices and maps
+
+#### TL;DR
+TL;DR
+
+Remembering that slices and maps are pointers can prevent common data races.
+
+Let's implement a `Cache` struct used to handle caching for customer balances. This struct will contain a map of balances per customer ID and a mutex to protect concurrent accesses:
+
+type Cache struct {
+    mu       sync.RWMutex
+    balances map[string]float64
+}
+
+Next, we add an `AddBalance` method that mutates the `balances` map. The mutation is done in a critical section (within a mutex lock and a mutex unlock):
+
+func (c *Cache) AddBalance(id string, balance float64) {
+    c.mu.Lock()
+    c.balances[id] = balance
+    c.mu.Unlock()
+}
+
+Meanwhile, we have to implement a method to calculate the average balance for all the customers. One idea is to handle a minimal critical section this way:
+
+func (c *Cache) AverageBalance() float64 {
+    c.mu.RLock()
+    balances := c.balances // Creates a copy of the balances map
+    c.mu.RUnlock()
+
+    sum := 0.
+    for _, balance := range balances { // Iterates over the copy, outside of the critical section
+        sum += balance
+    }
+    return sum / float64(len(balances))
+}
+
+What's the problem with this code?
+
+If we run a test using the `-race` flag with two concurrent goroutines, one calling `AddBalance` (hence mutating balances) and another calling `AverageBalance`, a data race occurs. What’s the problem here?
+
+Internally, a map is a `runtime.hmap` struct containing mostly metadata (for example, a counter) and a pointer referencing data buckets. So, `balances := c.balances` doesn’t copy the actual data. Therefore, the two goroutines perform operations on the same data set, and one mutates it. Hence, it's a data race.
+
+One possible solution is to protect the whole `AverageBalance` function:
+
+func (c *Cache) AverageBalance() float64 {
+    c.mu.RLock()
+    defer c.mu.RUnlock() // Unlocks when the function returns
+
+    sum := 0.
+    for _, balance := range c.balances {
+        sum += balance
+    }
+    return sum / float64(len(c.balances))
+}
+
+Another option, if the iteration operation isn’t lightweight, is to work on an actual copy of the data and protect only the copy:
+
+func (c *Cache) AverageBalance() float64 {
+    c.mu.RLock()
+    m := maps.Clone(c.balances)
+    c.mu.RUnlock()
+
+    sum := 0.
+    for _, balance := range m {
+        sum += balance
+    }
+    return sum / float64(len(m))
+}
+
+Once we have made a deep copy, we release the mutex. The iterations are done on the copy outside of the critical section.
+
+In summary, we have to be careful with the boundaries of a mutex lock. In this section, we have seen why assigning an existing map (or an existing slice) to a map isn’t enough to protect against data races. The new variable, whether a map or a slice, is backed by the same data set. There are two leading solutions to prevent this: protect the whole function, or work on a copy of the actual data. In all cases, let’s be cautious when designing critical sections and make sure the boundaries are accurately defined.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/09-concurrency-practice/70-mutex-slices-maps/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-71-misusing-syncwaitgroup.md b/prompts/skills/100-go-mistakes/references/mistake-71-misusing-syncwaitgroup.md
new file mode 100644
index 0000000..e40513e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-71-misusing-syncwaitgroup.md
@@ -0,0 +1,3 @@
+# Mistake #71: Misusing sync.WaitGroup
+
+[Documentation for mistake #71 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-72-forgetting-about-synccond.md b/prompts/skills/100-go-mistakes/references/mistake-72-forgetting-about-synccond.md
new file mode 100644
index 0000000..549a47d
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-72-forgetting-about-synccond.md
@@ -0,0 +1,3 @@
+# Mistake #72: Forgetting about sync.Cond
+
+[Documentation for mistake #72 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-73-not-using-errgroup.md b/prompts/skills/100-go-mistakes/references/mistake-73-not-using-errgroup.md
new file mode 100644
index 0000000..4c5486a
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-73-not-using-errgroup.md
@@ -0,0 +1,3 @@
+# Mistake #73: Not using errgroup
+
+[Documentation for mistake #73 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-74-copying-a-sync-type.md b/prompts/skills/100-go-mistakes/references/mistake-74-copying-a-sync-type.md
new file mode 100644
index 0000000..b92f8f8
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-74-copying-a-sync-type.md
@@ -0,0 +1,3 @@
+# Mistake #74: Copying a sync type
+
+[Documentation for mistake #74 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-75-providing-a-wrong-time-duration.md b/prompts/skills/100-go-mistakes/references/mistake-75-providing-a-wrong-time-duration.md
new file mode 100644
index 0000000..6446af0
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-75-providing-a-wrong-time-duration.md
@@ -0,0 +1,28 @@
+# Mistake #75: Providing a wrong time duration
+
+#### TL;DR
+TL;DR
+
+Remain cautious with functions accepting a `time.Duration`. Even though passing an integer is allowed, strive to use the time API to prevent any possible confusion.
+
+Many common functions in the standard library accept a `time.Duration`, which is an alias for the `int64` type. However, one `time.Duration` unit represents one nanosecond, instead of one millisecond, as commonly seen in other programming languages. As a result, passing numeric types instead of using the `time.Duration` API can lead to unexpected behavior.
+
+A developer with experience in other languages might assume that the following code creates a new `time.Ticker` that delivers ticks every second, given the value `1000`:
+
+ticker := time.NewTicker(1000)
+for {
+    select {
+    case <-ticker.C:
+        // Do something
+    }
+}
+
+However, because 1,000 `time.Duration` units = 1,000 nanoseconds, ticks are delivered every 1,000 nanoseconds = 1 microsecond, not every second as assumed.
+
+We should always use the `time.Duration` API to avoid confusion and unexpected behavior:
+
+ticker = time.NewTicker(time.Microsecond)
+// Or
+ticker = time.NewTicker(1000 * time.Nanosecond)
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/75-wrong-time-duration/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-76-timeafter-and-memory-leaks.md b/prompts/skills/100-go-mistakes/references/mistake-76-timeafter-and-memory-leaks.md
new file mode 100644
index 0000000..ec6613e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-76-timeafter-and-memory-leaks.md
@@ -0,0 +1,3 @@
+# Mistake #76: time.After and memory leaks
+
+[Documentation for mistake #76 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-77-json-handling-common-mistakes.md b/prompts/skills/100-go-mistakes/references/mistake-77-json-handling-common-mistakes.md
new file mode 100644
index 0000000..2174514
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-77-json-handling-common-mistakes.md
@@ -0,0 +1,19 @@
+# Mistake #77: JSON handling common mistakes
+
+* Unexpected behavior because of type embedding
+
+Be careful about using embedded fields in Go structs. Doing so may lead to sneaky bugs like an embedded time.Time field implementing the `json.Marshaler` interface, hence overriding the default marshaling behavior.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/77-json-handling/type-embedding/main.go)
+
+* JSON and the monotonic clock
+
+When comparing two `time.Time` structs, recall that `time.Time` contains both a wall clock and a monotonic clock, and the comparison using the == operator is done on both clocks.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/77-json-handling/monotonic-clock/main.go)
+
+* Map of `any`
+
+To avoid wrong assumptions when you provide a map while unmarshaling JSON data, remember that numerics are converted to `float64` by default.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/77-json-handling/map-any/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-78-common-sql-mistakes.md b/prompts/skills/100-go-mistakes/references/mistake-78-common-sql-mistakes.md
new file mode 100644
index 0000000..48164b9
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-78-common-sql-mistakes.md
@@ -0,0 +1,29 @@
+# Mistake #78: Common SQL mistakes
+
+* Forgetting that `sql.Open` doesn't necessarily establish connections to a database
+
+Call the `Ping` or `PingContext` method if you need to test your configuration and make sure a database is reachable.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/78-sql/sql-open)
+
+* Forgetting about connections pooling
+
+Configure the database connection parameters for production-grade applications.
+
+* Not using prepared statements
+
+Using SQL prepared statements makes queries more efficient and more secure.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/78-sql/prepared-statements)
+
+* Mishandling null values
+
+Deal with nullable columns in tables using pointers or `sql.NullXXX` types.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/78-sql/null-values/main.go)
+
+* Not handling rows iteration errors
+
+Call the `Err` method of `sql.Rows` after row iterations to ensure that you haven’t missed an error while preparing the next row.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/78-sql/rows-iterations-errors)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-79-not-closing-transient-resources-http-body-sqlrows-and-osfile.md b/prompts/skills/100-go-mistakes/references/mistake-79-not-closing-transient-resources-http-body-sqlrows-and-osfile.md
new file mode 100644
index 0000000..87208da
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-79-not-closing-transient-resources-http-body-sqlrows-and-osfile.md
@@ -0,0 +1,3 @@
+# Mistake #79: Not closing transient resources (HTTP body, sql.Rows, and os.File)
+
+[Documentation for mistake #79 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-80-forgetting-the-return-statement-after-replying-to-an-http-request.md b/prompts/skills/100-go-mistakes/references/mistake-80-forgetting-the-return-statement-after-replying-to-an-http-request.md
new file mode 100644
index 0000000..729b968
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-80-forgetting-the-return-statement-after-replying-to-an-http-request.md
@@ -0,0 +1,42 @@
+# Mistake #80: Forgetting the return statement after replying to an HTTP request
+
+#### TL;DR
+TL;DR
+
+To avoid unexpected behaviors in HTTP handler implementations, make sure you don’t miss the `return` statement if you want a handler to stop after `http.Error`.
+
+Consider the following HTTP handler that handles an error from `foo` using `http.Error`:
+
+func handler(w http.ResponseWriter, req *http.Request) {
+    err := foo(req)
+    if err != nil {
+        http.Error(w, "foo", http.StatusInternalServerError)
+    }
+
+    _, _ = w.Write([]byte("all good"))
+    w.WriteHeader(http.StatusCreated)
+}
+
+If we run this code and `err != nil`, the HTTP response would be:
+
+foo
+all good
+
+The response contains both the error and success messages, and also the first HTTP status code, 500. There would also be a warning log indicating that we attempted to write the status code multiple times:
+
+2023/10/10 16:45:33 http: superfluous response.WriteHeader call from main.handler (main.go:20)
+
+The mistake in this code is that `http.Error` does not stop the handler's execution, which means the success message and status code get written in addition to the error. Beyond an incorrect response, failing to return after writing an error can lead to the unwanted execution of code and unexpected side-effects. The following code adds the `return` statement following the `http.Error` and exhibits the desired behavior when ran:
+
+func handler(w http.ResponseWriter, req *http.Request) {
+    err := foo(req)
+    if err != nil {
+        http.Error(w, "foo", http.StatusInternalServerError)
+        return // Adds the return statement
+    }
+
+    _, _ = w.Write([]byte("all good"))
+    w.WriteHeader(http.StatusCreated)
+}
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/80-http-return/main.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-81-using-the-default-http-client-and-server.md b/prompts/skills/100-go-mistakes/references/mistake-81-using-the-default-http-client-and-server.md
new file mode 100644
index 0000000..8560717
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-81-using-the-default-http-client-and-server.md
@@ -0,0 +1,8 @@
+# Mistake #81: Using the default HTTP client and server
+
+#### TL;DR
+TL;DR
+
+For production-grade applications, don’t use the default HTTP client and server implementations. These implementations are missing timeouts and behaviors that should be mandatory in production.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/10-standard-lib/81-default-http-client-server/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-82-not-categorizing-tests-build-tags-environment-variables-and-short-mode.md b/prompts/skills/100-go-mistakes/references/mistake-82-not-categorizing-tests-build-tags-environment-variables-and-short-mode.md
new file mode 100644
index 0000000..de30dca
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-82-not-categorizing-tests-build-tags-environment-variables-and-short-mode.md
@@ -0,0 +1,8 @@
+# Mistake #82: Not categorizing tests (build tags, environment variables, and short mode)
+
+#### TL;DR
+TL;DR
+
+Categorizing tests using build flags, environment variables, or short mode makes the testing process more efficient. You can create test categories using build flags or environment variables (for example, unit versus integration tests) and differentiate short from long-running tests to decide which kinds of tests to execute.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/82-categorizing-tests/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-83-not-enabling-the-race-flag.md b/prompts/skills/100-go-mistakes/references/mistake-83-not-enabling-the-race-flag.md
new file mode 100644
index 0000000..0c636ce
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-83-not-enabling-the-race-flag.md
@@ -0,0 +1,69 @@
+# Mistake #83: Not enabling the race flag
+
+#### TL;DR
+TL;DR
+
+Enabling the `-race` flag is highly recommended when writing concurrent applications. Doing so allows you to catch potential data races that can lead to software bugs.
+
+In Go, the race detector isn’t a static analysis tool used during compilation; instead, it’s a tool to find data races that occur at runtime. To enable it, we have to enable the -race flag while compiling or running a test. For example:
+
+go test -race ./...
+
+Once the race detector is enabled, the compiler instruments the code to detect data races. Instrumentation refers to a compiler adding extra instructions: here, tracking all memory accesses and recording when and how they occur.
+
+Enabling the race detector adds an overhead in terms of memory and execution time; hence, it's generally recommended to enable it only during local testing or continuous integration, not production.
+
+If a race is detected, Go raises a warning. For example:
+
+package main
+
+import (
+    "fmt"
+)
+
+func main() {
+    i := 0
+    go func() { i++ }()
+    fmt.Println(i)
+}
+
+Running this code with the `-race` logs the following warning:
+
+==================
+WARNING: DATA RACE
+Write at 0x00c000026078 by goroutine 7: # (1)
+  main.main.func1()
+      /tmp/app/main.go:9 +0x4e
+
+Previous read at 0x00c000026078 by main goroutine: # (2)
+  main.main()
+      /tmp/app/main.go:10 +0x88
+
+Goroutine 7 (running) created at: # (3)
+  main.main()
+      /tmp/app/main.go:9 +0x7a
+==================
+
+* Indicates that goroutine 7 was writing
+* Indicates that the main goroutine was reading
+* Indicates when the goroutine 7 was created
+
+Let’s make sure we are comfortable reading these messages. Go always logs the following:
+
+* The concurrent goroutines that are incriminated: here, the main goroutine and goroutine 7.
+* Where accesses occur in the code: in this case, lines 9 and 10.
+* When these goroutines were created: goroutine 7 was created in main().
+
+In addition, if a specific file contains tests that lead to data races, we can exclude it  from race detection using the `!race` build tag:
+
+//go:build !race
+
+package main
+
+import (
+    "testing"
+)
+
+func TestFoo(t *testing.T) {
+    // ...
+}
diff --git a/prompts/skills/100-go-mistakes/references/mistake-84-not-using-test-execution-modes-parallel-and-shuffle.md b/prompts/skills/100-go-mistakes/references/mistake-84-not-using-test-execution-modes-parallel-and-shuffle.md
new file mode 100644
index 0000000..9c7f9ed
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-84-not-using-test-execution-modes-parallel-and-shuffle.md
@@ -0,0 +1,6 @@
+# Mistake #84: Not using test execution modes (parallel and shuffle)
+
+#### TL;DR
+TL;DR
+
+Using the `-parallel` flag is an efficient way to speed up tests, especially long-running ones. Use the `-shuffle` flag to help ensure that a test suite doesn’t rely on wrong assumptions that could hide bugs.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-85-not-using-table-driven-tests.md b/prompts/skills/100-go-mistakes/references/mistake-85-not-using-table-driven-tests.md
new file mode 100644
index 0000000..9624b8c
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-85-not-using-table-driven-tests.md
@@ -0,0 +1,8 @@
+# Mistake #85: Not using table-driven tests
+
+#### TL;DR
+TL;DR
+
+Table-driven tests are an efficient way to group a set of similar tests to prevent code duplication and make future updates easier to handle.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/85-table-driven-tests/main_test.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-86-sleeping-in-unit-tests.md b/prompts/skills/100-go-mistakes/references/mistake-86-sleeping-in-unit-tests.md
new file mode 100644
index 0000000..3827501
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-86-sleeping-in-unit-tests.md
@@ -0,0 +1,8 @@
+# Mistake #86: Sleeping in unit tests
+
+#### TL;DR
+TL;DR
+
+Avoid sleeps using synchronization to make a test less flaky and more robust. If synchronization isn’t possible, consider a retry approach.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/86-sleeping/main_test.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-87-not-dealing-with-the-time-api-efficiently.md b/prompts/skills/100-go-mistakes/references/mistake-87-not-dealing-with-the-time-api-efficiently.md
new file mode 100644
index 0000000..c41d2b2
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-87-not-dealing-with-the-time-api-efficiently.md
@@ -0,0 +1,8 @@
+# Mistake #87: Not dealing with the time API efficiently
+
+#### TL;DR
+TL;DR
+
+Understanding how to deal with functions using the time API is another way to make a test less flaky. You can use standard techniques such as handling the time as part of a hidden dependency or asking clients to provide it.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/87-time-api/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-88-not-using-testing-utility-packages-httptest-and-iotest.md b/prompts/skills/100-go-mistakes/references/mistake-88-not-using-testing-utility-packages-httptest-and-iotest.md
new file mode 100644
index 0000000..583646e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-88-not-using-testing-utility-packages-httptest-and-iotest.md
@@ -0,0 +1,3 @@
+# Mistake #88: Not using testing utility packages (httptest and iotest)
+
+[Documentation for mistake #88 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-89-writing-inaccurate-benchmarks.md b/prompts/skills/100-go-mistakes/references/mistake-89-writing-inaccurate-benchmarks.md
new file mode 100644
index 0000000..5b79fc6
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-89-writing-inaccurate-benchmarks.md
@@ -0,0 +1,16 @@
+# Mistake #89: Writing inaccurate benchmarks
+
+#### TL;DR
+TL;DR
+
+Regarding benchmarks:
+
+* Use time methods to preserve the accuracy of a benchmark.
+* Increasing benchtime or using tools such as benchstat can be helpful when dealing with micro-benchmarks.
+* Be careful with the results of a micro-benchmark if the system that ends up running the application is different from the one running the micro-benchmark.
+* Make sure the function under test leads to a side effect, to prevent compiler optimizations from fooling you about the benchmark results.
+* To prevent the observer effect, force a benchmark to re-create the data used by a CPU-bound function.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/89-benchmark/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-90-not-exploring-all-the-go-testing-features---not-using-fuzzing.md b/prompts/skills/100-go-mistakes/references/mistake-90-not-exploring-all-the-go-testing-features---not-using-fuzzing.md
new file mode 100644
index 0000000..899200e
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-90-not-exploring-all-the-go-testing-features---not-using-fuzzing.md
@@ -0,0 +1,23 @@
+# Mistake #90: Not exploring all the Go testing features
+
+* Code coverage
+
+Use code coverage with the `-coverprofile` flag to quickly see which part of the code needs more attention.
+
+* Testing from a different package
+
+Place unit tests in a different package to enforce writing tests that focus on an exposed behavior, not internals.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/90-testing-features/different-package/main_test.go)
+
+* Utility functions
+
+Handling errors using the `*testing.T` variable instead of the classic `if err != nil` makes code shorter and easier to read.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/90-testing-features/utility-function/main_test.go)
+
+* Setup and teardown
+
+You can use setup and teardown functions to configure a complex environment, such as in the case of integration tests.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/11-testing/90-testing-features/setup-teardown/main_test.go)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-91-not-understanding-cpu-caches.md b/prompts/skills/100-go-mistakes/references/mistake-91-not-understanding-cpu-caches.md
new file mode 100644
index 0000000..e5f010d
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-91-not-understanding-cpu-caches.md
@@ -0,0 +1,25 @@
+# Mistake #91: Not understanding CPU caches
+
+* CPU architecture
+
+Understanding how to use CPU caches is important for optimizing CPU-bound applications because the L1 cache is about 50 to 100 times faster than the main memory.
+
+* Cache line
+
+Being conscious of the cache line concept is critical to understanding how to organize data in data-intensive applications. A CPU doesn’t fetch memory word by word; instead, it usually copies a memory block to a 64-byte cache line. To get the most out of each individual cache line, enforce spatial locality.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/91-cpu-caches/cache-line/)
+
+* Slice of structs vs. struct of slices
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/91-cpu-caches/slice-structs/)
+
+* Predictability
+
+Making code predictable for the CPU can also be an efficient way to optimize certain functions. For example, a unit or constant stride is predictable for the CPU, but a non-unit stride (for example, a linked list) isn’t predictable.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/91-cpu-caches/predictability/)
+
+* Cache placement policy
+
+To avoid a critical stride, hence utilizing only a tiny portion of the cache, be aware that caches are partitioned.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-92-writing-concurrent-code-that-leads-to-false-sharing.md b/prompts/skills/100-go-mistakes/references/mistake-92-writing-concurrent-code-that-leads-to-false-sharing.md
new file mode 100644
index 0000000..54e8816
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-92-writing-concurrent-code-that-leads-to-false-sharing.md
@@ -0,0 +1,10 @@
+# Mistake #92: Writing concurrent code that leads to false sharing
+
+#### TL;DR
+TL;DR
+
+Knowing that lower levels of CPU caches aren’t shared across all the cores helps avoid performance-degrading patterns such as false sharing while writing concurrency code. Sharing memory is an illusion.
+
+Read the full section here.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/92-false-sharing/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-93-not-taking-into-account-instruction-level-parallelism.md b/prompts/skills/100-go-mistakes/references/mistake-93-not-taking-into-account-instruction-level-parallelism.md
new file mode 100644
index 0000000..13d2f50
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-93-not-taking-into-account-instruction-level-parallelism.md
@@ -0,0 +1,8 @@
+# Mistake #93: Not taking into account instruction-level parallelism
+
+#### TL;DR
+TL;DR
+
+Use ILP to optimize specific parts of your code to allow a CPU to execute as many parallel instructions as possible. Identifying data hazards is one of the main steps.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/93-instruction-level-parallelism/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-94-not-being-aware-of-data-alignment.md b/prompts/skills/100-go-mistakes/references/mistake-94-not-being-aware-of-data-alignment.md
new file mode 100644
index 0000000..69f19eb
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-94-not-being-aware-of-data-alignment.md
@@ -0,0 +1,8 @@
+# Mistake #94: Not being aware of data alignment
+
+#### TL;DR
+TL;DR
+
+You can avoid common mistakes by remembering that in Go, basic types are aligned with their own size. For example, keep in mind that reorganizing the fields of a struct by size in descending order can lead to more compact structs (less memory allocation and potentially a better spatial locality).
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/94-data-alignment/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-95-not-understanding-stack-vs-heap.md b/prompts/skills/100-go-mistakes/references/mistake-95-not-understanding-stack-vs-heap.md
new file mode 100644
index 0000000..69ed7ce
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-95-not-understanding-stack-vs-heap.md
@@ -0,0 +1,8 @@
+# Mistake #95: Not understanding stack vs. heap
+
+#### TL;DR
+TL;DR
+
+Understanding the fundamental differences between heap and stack should also be part of your core knowledge when optimizing a Go application. Stack allocations are almost free, whereas heap allocations are slower and rely on the GC to clean the memory.
+
+[Source code](https://github.com/teivah/100-go-mistakes/tree/master/src/12-optimizations/95-stack-heap/)
diff --git a/prompts/skills/100-go-mistakes/references/mistake-96-not-knowing-how-to-reduce-allocations.md b/prompts/skills/100-go-mistakes/references/mistake-96-not-knowing-how-to-reduce-allocations.md
new file mode 100644
index 0000000..8872340
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-96-not-knowing-how-to-reduce-allocations.md
@@ -0,0 +1,3 @@
+# Mistake #96: Not knowing how to reduce allocations
+
+[Documentation for mistake #96 from 100go.co]
diff --git a/prompts/skills/100-go-mistakes/references/mistake-97-not-relying-on-inlining.md b/prompts/skills/100-go-mistakes/references/mistake-97-not-relying-on-inlining.md
new file mode 100644
index 0000000..6825c82
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-97-not-relying-on-inlining.md
@@ -0,0 +1,6 @@
+# Mistake #97: Not relying on inlining
+
+#### TL;DR
+TL;DR
+
+Use the fast-path inlining technique to efficiently reduce the amortized time to call a function.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-98-not-using-go-diagnostics-tooling.md b/prompts/skills/100-go-mistakes/references/mistake-98-not-using-go-diagnostics-tooling.md
new file mode 100644
index 0000000..2a07e97
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-98-not-using-go-diagnostics-tooling.md
@@ -0,0 +1,8 @@
+# Mistake #98: Not using Go diagnostics tooling
+
+#### TL;DR
+TL;DR
+
+Rely on profiling and the execution tracer to understand how an application performs and the parts to optimize.
+
+Read the full section here.
diff --git a/prompts/skills/100-go-mistakes/references/mistake-99-not-understanding-how-the-gc-works.md b/prompts/skills/100-go-mistakes/references/mistake-99-not-understanding-how-the-gc-works.md
new file mode 100644
index 0000000..fc6d7ba
--- /dev/null
+++ b/prompts/skills/100-go-mistakes/references/mistake-99-not-understanding-how-the-gc-works.md
@@ -0,0 +1,3 @@
+# Mistake #99: Not understanding how the GC works
+
+[Documentation for mistake #99 from 100go.co]