KISS server monitoring with Gogios
Published at 2023-06-01T21:10:17+03:00
Introduction
Gogios is a minimalistic and easy-to-use monitoring tool I programmed in Google Go designed specifically for small-scale self-hosted servers and virtual machines. The primary purpose of Gogios is to monitor my personal server infrastructure for foo.zone, my MTAs, my authoritative DNS servers, my NextCloud, Wallabag and Anki sync server installations, etc.
With compatibility with the Nagios Check API, Gogios offers a simple yet effective solution to monitor a limited number of resources. In theory, Gogios scales to a couple of thousand checks, though. You can clone it from Codeberg here:
https://codeberg.org/snonux/gogios
_____________________________ ____________________________
/ \ / \
| _______________________ || ______________________ |
| / \ || / \ |
| | # Alerts with status c| || | # Unhandled alerts: | |
| | hanged: | || | | |
| | | || | CRITICAL: Check Pizza| |
| | OK->CRITICAL: Check Pi| || | : Late delivery | |
| | zza: Late delivery | || | | |
| | | || | WARNING: Check Thirst| |
| | | || | : OutofKombuchaExcept| |
| \_______________________/ || \______________________/ |
| /|\ GOGIOS MONITOR 1 _ || /|\ GOGIOS MONITOR 2 _ |
\_____________________________/ \____________________________/
!_________________________! !________________________!
------------------------------------------------
ASCII art was modified by Paul Buetow
The original can be found at
https://asciiart.website/index.php?art=objects/computers
Motivation
With experience in monitoring solutions like Nagios, Icinga, Prometheus and OpsGenie, these tools often came with many features that I didn't necessarily need for personal use. Contact groups, host groups, check clustering, and the requirement of operating a DBMS and a WebUI added complexity and bloat to my monitoring setup.
My primary goal was to have a single email address for notifications and a simple mechanism to periodically execute standard Nagios check scripts and notify me of any state changes. I wanted the most minimalistic monitoring solution possible but wasn't satisfied with the available options.
This led me to create Gogios, a lightweight monitoring tool tailored to my specific needs. I chose the Go programming language for this project as it comes, in my opinion, with the best balance of ease to use and performance.
Features
- Compatible with Nagios Check scripts: Gogios leverages the widely-used Nagios Check API, allowing to use existing Nagios plugins.
- Lightweight and Minimalistic: Gogios is designed to be simple and fairly easy to set up.
- Configurable Check Timeout and Concurrency: Gogios allows you to set a timeout for checks and configure the number of concurrent checks, offering flexibility in monitoring your resources.
- Configurable check dependency: A check can depend on another check, which enables scenarios like not executing an HTTP check when the server isn't pingable.
- Retries: Check retry and retry intervals are configurable per check.
- Email Notifications: Gogios can send email notifications regarding the status of monitored services, ensuring you stay informed about potential issues.
- CRON-based Execution: Gogios can be quickly scheduled to run periodically via CRON, allowing you to automate monitoring without needing a complex setup.
Example alert
This is an example alert report received via E-Mail. Whereas, [C:2 W:0 U:0 OK:51] means that we've got two alerts in status critical, 0 warnings, 0 unknowns and 51 OKs.
Subject: GOGIOS Report [C:2 W:0 U:0 OK:51] This is the recent Gogios report! # Alerts with status changed: OK->CRITICAL: Check ICMP4 vulcan.buetow.org: Check command timed out OK->CRITICAL: Check ICMP6 vulcan.buetow.org: Check command timed out # Unhandled alerts: CRITICAL: Check ICMP4 vulcan.buetow.org: Check command timed out CRITICAL: Check ICMP6 vulcan.buetow.org: Check command timed out Have a nice day!
Installation
Compiling and installing Gogios
This document is primarily written for OpenBSD, but applying the corresponding steps to any Unix-like (e.g. Linux-based) operating system should be easy. On systems other than OpenBSD, you may always have to replace does with the sudo command and replace the /usr/local/bin path with /usr/bin.
To compile and install Gogios on OpenBSD, follow these steps:
git clone https://codeberg.org/snonux/gogios.git cd gogios go build -o gogios cmd/gogios/main.go doas cp gogios /usr/local/bin/gogios doas chmod 755 /usr/local/bin/gogios
You can use cross-compilation if you want to compile Gogios for OpenBSD on a Linux system without installing the Go compiler on OpenBSD. Follow these steps:
export GOOS=openbsd export GOARCH=amd64 go build -o gogios cmd/gogios/main.go
On your OpenBSD system, copy the binary to /usr/local/bin/gogios and set the correct permissions as described in the previous section. All steps described here you could automate with your configuration management system of choice. I use Rexify, the friendly configuration management system, to automate the installation, but that is out of the scope of this document.
https://www.rexify.org
Setting up user, group and directories
It is best to create a dedicated system user and group for Gogios to ensure proper isolation and security. Here are the steps to create the _gogios user and group under OpenBSD:
doas adduser -group _gogios -batch _gogios doas usermod -d /var/run/gogios _gogios doas mkdir -p /var/run/gogios doas chown _gogios:_gogios /var/run/gogios doas chmod 750 /var/run/gogios
Please note that creating a user and group might differ depending on your operating system. For other operating systems, consult their documentation for creating system users and groups.
Installing monitoring plugins
Gogios relies on external Nagios or Icinga monitoring plugin scripts. On OpenBSD, you can install the monitoring-plugins package with Gogios. The monitoring-plugins package is a collection of monitoring plugins, similar to Nagios plugins, that can be used to monitor various services and resources:
doas pkg_add monitoring-plugins doas pkg_add nrpe # If you want to execute checks remotely via NRPE.
Once the installation is complete, you can find the monitoring plugins in the /usr/local/libexec/nagios directory, which then can be configured to be used in gogios.json.
Configuration
MTA
Gogios requires a local Mail Transfer Agent (MTA) such as Postfix or OpenBSD SMTPD running on the same server where the CRON job (see about the CRON job further below) is executed. The local MTA handles email delivery, allowing Gogios to send email notifications to monitor status changes. Before using Gogios, ensure that you have a properly configured MTA installed and running on your server to facilitate the sending of emails. Once the MTA is set up and functioning correctly, Gogios can leverage it to send email notifications.
You can use the mail command to send an email via the command line on OpenBSD. Here's an example of how to send a test email to ensure that your email server is working correctly:
echo 'This is a test email from OpenBSD.' | mail -s 'Test Email' your-email@example.com
Check the recipient's inbox to confirm the delivery of the test email. If the email is delivered successfully, it indicates that your email server is configured correctly and functioning. Please check your MTA logs in case of issues.
Configuring Gogios
To configure Gogios, create a JSON configuration file (e.g., /etc/gogios.json). Here's an example configuration:
{
"EmailTo": "paul@dev.buetow.org",
"EmailFrom": "gogios@buetow.org",
"CheckTimeoutS": 10,
"CheckConcurrency": 2,
"StateDir": "/var/run/gogios",
"Checks": {
"Check ICMP4 www.foo.zone": {
"Plugin": "/usr/local/libexec/nagios/check_ping",
"Args": [ "-H", "www.foo.zone", "-4", "-w", "50,10%", "-c", "100,15%" ],
"Retries": 3,
"RetryInterval": 10
},
"Check ICMP6 www.foo.zone": {
"Plugin": "/usr/local/libexec/nagios/check_ping",
"Args": [ "-H", "www.foo.zone", "-6", "-w", "50,10%", "-c", "100,15%" ],
"Retries": 3,
"RetryInterval": 10
},
"www.foo.zone HTTP IPv4": {
"Plugin": "/usr/local/libexec/nagios/check_http",
"Args": ["www.foo.zone", "-4"],
"DependsOn": ["Check ICMP4 www.foo.zone"]
},
"www.foo.zone HTTP IPv6": {
"Plugin": "/usr/local/libexec/nagios/check_http",
"Args": ["www.foo.zone", "-6"],
"DependsOn": ["Check ICMP6 www.foo.zone"]
}
"Check NRPE Disk Usage foo.zone": {
"Plugin": "/usr/local/libexec/nagios/check_nrpe",
"Args": ["-H", "foo.zone", "-c", "check_disk", "-p", "5666", "-4"]
}
}
}
- EmailTo: Specifies the recipient of the email notifications.
- EmailFrom: Indicates the sender's email address for email notifications.
- CheckTimeoutS: Sets the timeout for checks in seconds.
- CheckConcurrency: Determines the number of concurrent checks that can run simultaneously.
- StateDir: Specifies the directory where Gogios stores its persistent state in a state.json file.
- Checks: Defines a list of checks to be performed, each with a unique name, plugin path, and arguments.
Adjust the configuration file according to your needs, specifying the checks you want Gogios to perform.
If you want to execute checks only when another check succeeded (status OK), use DependsOn. In the example above, the HTTP checks won't run when the hosts aren't pingable. They will show up as UNKNOWN in the report.
Retries and RetryInterval are optional check configuration parameters. In case of failure, Gogios will retry Retries times each RetryInterval seconds.
For remote checks, use the check_nrpe plugin. You also need to have the NRPE server set up correctly on the target host (out of scope for this document).
The state.json file mentioned above keeps track of the monitoring state and check results between Gogios runs, enabling Gogios only to send email notifications when there are changes in the check status.
Running Gogios
Now it is time to give it a first run. On OpenBSD, do:
doas -u _gogios /usr/local/bin/gogios -cfg /etc/gogios.json
To run Gogios via CRON on OpenBSD as the gogios user and check all services once per minute, follow these steps:
Type doas crontab -e -u _gogios and press Enter to open the crontab file for the _gogios user for editing and add the following lines to the crontab file:
*/5 8-22 * * * /usr/local/bin/gogios -cfg /etc/gogios.json 0 7 * * * /usr/local/bin/gogios -renotify -cfg /etc/gogios.json
Gogios is now configured to run every five minutes from 8 am to 10 pm via CRON as the _gogios user. It will execute the checks and send monitoring status whenever a check status changes via email according to your configuration. Also, Gogios will run once at 7 am every morning and re-notify all unhandled alerts as a reminder.
High-availability
To create a high-availability Gogios setup, you can install Gogios on two servers that will monitor each other using the NRPE (Nagios Remote Plugin Executor) plugin. By running Gogios in alternate CRON intervals on both servers, you can ensure that even if one server goes down, the other will continue monitoring your infrastructure and sending notifications.
- Install Gogios on both servers following the compilation and installation instructions provided earlier.
- Install the NRPE server (out of scope for this document) and plugin on both servers. This plugin allows you to execute Nagios check scripts on remote hosts.
- Configure Gogios on both servers to monitor each other using the NRPE plugin. Add a check to the Gogios configuration file (/etc/gogios.json) on both servers that uses the NRPE plugin to execute a check script on the other server. For example, if you have Server A and Server B, the configuration on Server A should include a check for Server B, and vice versa.
- Set up alternate CRON intervals on both servers. Configure the CRON job on Server A to run Gogios at minutes 0, 10, 20, ..., and on Server B to run at minutes 5, 15, 25, ... This will ensure that if one server goes down, the other server will continue monitoring and sending notifications.
- Gogios doesn't support clustering. So it means when both servers are up, unhandled alerts will be notified via E-Mail twice; from each server once. That's the trade-off for simplicity.
There are plans to make it possible to execute certain checks only on certain nodes (e.g. on elected leader or master nodes). This is still in progress (check out my Gorum Git project).
Conclusion:
Gogios is a lightweight and straightforward monitoring tool that is perfect for small-scale environments. With its compatibility with the Nagios Check API, email notifications, and CRON-based scheduling, Gogios offers an easy-to-use solution for those looking to monitor a limited number of resources. I personally use it to execute around 500 checks on my personal server infrastructure. I am very happy with this solution.
E-Mail your comments to foo@paul.cyou :-)
Back to the main site
