diff options
Diffstat (limited to 'config/boards/arm/adv360/adv360.dtsi')
| -rw-r--r-- | config/boards/arm/adv360/adv360.dtsi | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/config/boards/arm/adv360/adv360.dtsi b/config/boards/arm/adv360/adv360.dtsi new file mode 100644 index 0000000..c25243b --- /dev/null +++ b/config/boards/arm/adv360/adv360.dtsi @@ -0,0 +1,170 @@ +/* +* +* Copyright (c) 2021 Polarity Works +* SPDX-License-Identifier: MIT +* +*/ + +/dts-v1/; +#include <nordic/nrf52840_qiaa.dtsi> + +#include <dt-bindings/zmk/matrix_transform.h> + +/ { + model = "Adv360"; + compatible = "adv360"; + + chosen { + zephyr,code-partition = &code_partition; + zephyr,sram = &sram0; + zephyr,flash = &flash0; + zmk,kscan = &kscan0; + zmk,underglow = &led_strip; + zmk,backlight = &backlight; + zmk,matrix_transform = &default_transform; + }; + + default_transform: keymap_transform_0 { + compatible = "zmk,matrix-transform"; + columns = <22>; + rows = <5>; + + + map = < + RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,15) RC(4,16) RC(4,17) RC(4,18) RC(4,19) RC(4,20) RC(4,21) + RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,15) RC(3,16) RC(3,17) RC(3,18) RC(3,19) RC(3,20) RC(3,21) + RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,8) RC(2,9) RC(2,12) RC(2,13) RC(2,15) RC(2,16) RC(2,17) RC(2,18) RC(2,19) RC(2,20) RC(2,21) + RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11) RC(1,12) RC(1,13) RC(1,14) RC(1,16) RC(1,17) RC(1,18) RC(1,19) RC(1,20) RC(1,21) + RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,7) RC(0,8) RC(0,9) RC(0,12) RC(0,13) RC(0,14) RC(0,17) RC(0,18) RC(0,19) RC(0,20) RC(0,21) + + >; + }; + ext-power { + compatible = "zmk,ext-power-generic"; + label = "EXT_POWER"; + control-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + backlight: pwmleds { + compatible = "pwm-leds"; + label = "Backlight LEDs"; + pwm_led_0 { + pwms = <&pwm0 17>; + label = "Backlight LED 0"; + }; + +}; + leds { + compatible = "gpio-leds"; + blue_led: led_0 { + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + label = "Blue LED"; + }; + }; + + vbatt { + compatible = "zmk,battery-voltage-divider"; + label = "BATTERY"; + io-channels = <&adc 2>; + output-ohms = <100000>; + full-ohms = <(100000 + 100000)>; + }; +}; + +&pwm0 { + status = "okay"; + ch0-pin = <17>; +}; + +&adc { + status = "okay"; +}; + +&gpiote { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&usbd { + status = "okay"; +}; + +&uart0 { + compatible = "nordic,nrf-uarte"; + status = "okay"; + current-speed = <115200>; + tx-pin = <39>; + rx-pin = <44>; + rts-pin = <34>; + cts-pin = <9>; +}; + + +&flash0 { + /* + * For more information, see: + * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + sd_partition: partition@0 { + label = "softdevice"; + reg = <0x00000000 0x00026000>; + }; + code_partition: partition@26000 { + label = "code_partition"; + reg = <0x00026000 0x000c6000>; + }; + + /* + * The flash starting at 0x000ec000 and ending at + * 0x000f3fff is reserved for use by the application. + */ + + /* + * Storage partition will be used by FCB/LittleFS/NVS + * if enabled. + */ + storage_partition: partition@ec000 { + label = "storage"; + reg = <0x000ec000 0x00008000>; + }; + + boot_partition: partition@f4000 { + label = "adafruit_boot"; + reg = <0x000f4000 0x0000c000>; + }; + }; +}; + +&spi1 { + compatible = "nordic,nrf-spim"; + status = "okay"; + mosi-pin = <20>; + // Unused pins, needed for SPI definition, but not used by the ws2812 driver itself. + sck-pin = <27>; + miso-pin = <8>; + + led_strip: ws2812@0 { + compatible = "worldsemi,ws2812-spi"; + label = "WS2812"; + + /* SPI */ + reg = <0>; + spi-max-frequency = <4000000>; + + /* WS2812 */ + chain-length = <3>; /* number of LEDs */ + spi-one-frame = <0x70>; + spi-zero-frame = <0x40>; + }; +}; |