diff options
| author | ReFil <31960031+ReFil@users.noreply.github.com> | 2023-05-30 09:33:59 +0100 |
|---|---|---|
| committer | ReFil <31960031+ReFil@users.noreply.github.com> | 2023-07-06 17:41:42 +0100 |
| commit | 771d68f3a69c22e6b05650bd98adf7f06c80f3eb (patch) | |
| tree | c647e2ab583cdc9337a27fc13c6a13a2259fd0fc /config/boards/arm/adv360/adv360_right_defconfig | |
| parent | e4071905562d3a5635f68af19bb00a78e1cb554f (diff) | |
V3.0 Update
refactor(board): Update to z3.2
Major update to underlying code requires change to the repo, brought in line with zmk pr for commonality, fixed indentation to comply with zmk pre-commit formatting reqs
Update settings-reset, change RGB modes
Add Update instructions, Assets folder
Diffstat (limited to 'config/boards/arm/adv360/adv360_right_defconfig')
| -rw-r--r-- | config/boards/arm/adv360/adv360_right_defconfig | 27 |
1 files changed, 12 insertions, 15 deletions
diff --git a/config/boards/arm/adv360/adv360_right_defconfig b/config/boards/arm/adv360/adv360_right_defconfig index dd4a9a1..f1eb05f 100644 --- a/config/boards/arm/adv360/adv360_right_defconfig +++ b/config/boards/arm/adv360/adv360_right_defconfig @@ -1,14 +1,11 @@ # -# Copyright (c) 2021 Polarity Works +# Copyright (c) 2022 The ZMK Contributors # SPDX-License-Identifier: MIT # CONFIG_SOC_SERIES_NRF52X=y CONFIG_SOC_NRF52840_QIAA=y CONFIG_BOARD_ADV360_RIGHT=y -CONFIG_ZMK_BLE=y -CONFIG_ZMK_SPLIT=y - # Enable MPU CONFIG_ARM_MPU=y @@ -16,9 +13,8 @@ CONFIG_ARM_MPU=y # enable GPIO CONFIG_GPIO=y - - -# Enable SPI +# Enable SPI for LEDS +CONFIG_PINCTRL=y CONFIG_SPI=y CONFIG_SPI_NRFX=y @@ -33,27 +29,28 @@ CONFIG_FLASH_MAP=y # Enable 32kHz crystal CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y -CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM=y +CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM=y +#RGB leds config +CONFIG_WS2812_STRIP=y CONFIG_ZMK_RGB_UNDERGLOW=y CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=y CONFIG_ZMK_RGB_UNDERGLOW_ON_START=y CONFIG_ZMK_RGB_UNDERGLOW_EFF_START=4 CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y -# Use the STRIP config specific to the LEDs you're using -CONFIG_WS2812_STRIP=y -CONFIG_BT_CTLR_TX_PWR_PLUS_8=y +#Backlighting configuration CONFIG_PWM=y CONFIG_LED_PWM=y CONFIG_ZMK_BACKLIGHT=y +CONFIG_ZMK_BACKLIGHT_BRT_START=20 CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y -CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y -CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y - +#Misc configuration CONFIG_USB_DEVICE_VID=0x29EA CONFIG_USB_DEVICE_PID=0x0362 CONFIG_USB_DEVICE_MANUFACTURER="Kinesis Corporation" - +CONFIG_BT_CTLR_TX_PWR_PLUS_8=y +CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y +CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y CONFIG_BUILD_OUTPUT_UF2=y |